Replacement Control Panel and Circuit Board for LCI Electronic Leveling System

Question

Question:

This is the control for our auto level on our 2013 Fuzion toy hauler. The display will not light up and the rv is on our truck. A mobile RV repair said it needed a new circuit board, but they have not got back with me. Is this compatible with something your have and is it a plug and play or would it have to be programmed?

asked by: Wanda D

0

Expert Reply:

The correct replacement circuit and control board for your Lippert Electronic leveling system is the Replacement Control Panel for Lippert Ground Control 3.0 and Travel Trailer RV Leveling System # LC421484. This will be a plug and play solution, so it's easy to install and will not require any type of programming.

expert reply by: Erik B

0

control panel
(click to enlarge)

circuit board
(click to enlarge)

Rich P.

5/2/2025

So looking at this circuit board it is exactly like what I have so I need a replacement, but I noticed the replacements on your website. Don’t have the extra button like mine has like in this picture of the retract button so which one do I order it to replace my circuit board?

Nick S.

5/12/2025

@RichP I can definitely see if we have more of a direct replacement for yours. Do you know, or have a model number for your unit that I can cross reference and see what we have for you? We may have one exactly like yours, or one that is a newer version and just had some design changes. Either way I will be able to direct you to the exact replacement with that model number. Let me know and I will track it down for you.

I N.

5/18/2025

@NickS I need this exact controller. 14058 is my model number Thanks Rickey

Nick S.

5/19/2025

@IN Hey Rickey! I can make sure this is the direct replacement for you. Is that model number for the whole leveling system or just the control panel on yours? Do you know what manufacturer it is as well so I can take a look?

See All (5) Replies to Rich P. ∨

Answer 1

Hey Henry! I would be happy to help you get your 2026 Jeep Wrangler ready for flat towing. You will need the tow bar, base plate, safety cables, wiring, and a supplemental brake system. I recommend the following: -Blue Ox Base Plate Kit - Removable…

view full answer...

Answer 2

The Replacement Control Panel, part #LC421484 for the Lippert Ground Control 3.0 #LC358590 or #LC675817 is designed to be mounted in a compartment under the coach, protected from the elements as it is not resistant to them. The Lippert Ground Control…

view full answer...

Answer 3

Hey Noah! As long as the control pad on your Lippert Ground Control 3.0 System like item #LC358590 is functioning correctly, what you're seeing with the flashing left side arrow is the system notifying you where the lowest point is. I have…

view full answer...

Answer 4

The blank screen on your LCI Ground Control 3.0 could be either a power issue or a control module issue. I recommend first remove the panel and unplug it from the back leaving it unplugged for at least 15 minutes so that it loses all of the residual…

view full answer...

Answer 5

You will need the Replacement OneControl Advantage Controller #LC88TF for your 2018 Sanibel 5th wheel. This controller is the replacement for your number 425749 control box.

view full answer...

Answer 6

Because the total weight capacity of your trailer is limited by the lowest rated component, your axle capacity won't be increased by adding hubs with more lug nuts to the equation-even if they are rated higher than the axle. Moving to 8-lug hubs…

view full answer...

Answer 7

No, it really isn't but I have a solution. The MORryde RV Generator Slide Out Tray item #MR79RR is designed to be mounted in storage compartments. It needs a sturdy base to support the weight of your generator and you're not going to be able…

view full answer...

Answer 8

To replace the Level Up controller on your 2012 Dutchmen Infinity 3750FL you need the Replacement OneControl Advantage Controller #LC88TF. I confirmed this is what you're needing with my contact at Lippert!

view full answer...

Answer 9

Thank you for the picture of your jack motor as that makes it very easy to identify it. You are correct the part #LC305340 is the correct jack motor and leg but if you instead wanted just the motor you would want the part #LC343758 and you'd be…

view full answer...

Answer 10

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 11

If you're getting an "Excess Angle" error on your Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote - 4-Point Set #LC358590 that would indicate that an excessive angle was reached during…

view full answer...

Answer 12

The Northern Breeze trailer vent has been discontinued which means the replacement screen you are in need of is not available. While I know it is not exactly what you wanted to hear, the best option available is to replace your Northern Breeze vent.…

view full answer...

Replacement Control Panel and Circuit Board for LCI Electronic Leveling System

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching