Tongue Weight Capacity of Buyers Products 3370091558 Cast Flat Plate Trailer Coupler

Question

Question:

Need to know the recommended max tongue weight

asked by: Sam

0

Expert Reply:

The Buyers Products # 3370091558 Cast Flat Plate Trailer Coupler has an 18K capacity. According to Buyers Products, the maximum tongue weight capacity for the coupler would be 10% of the towing capacity, or 1800 lbs.

expert reply by: Mike L

0

Answer 1

Most modern tow dollies are either wide enough to handle most any late model vehicle that can be placed on a dolly or width adjustable to accommodate a variety of vehicle styles. The RoadMaster Tow Dolly with Electric Brakes, #RM-2050-1, is one of…

view full answer...

Answer 2

We have a Curt Class III hitch part #C15312 that fits your 2002 GMC Sierra 3500 with an 8 foot bed but the #C15302 only fits 2500 short bed models so it wouldn't work for you.

view full answer...

Answer 3

I spoke with my contact at Buyers Products and they informed me that the the bolts that mount the Buyers Products Cast Trailer Coupler part #3370091558 should be torqued to 225 ft lbs. The hardware should also be Grade 8. You may already have a…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Tongue Weight Capacity of Buyers Products 3370091558 Cast Flat Plate Trailer Coupler

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching