Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
This Tekonsha T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector #118272 harness is designed to be used with vehicles that already have a factory tow package. If you don't have that factory tow package, it may not fit.…
view full answer...It's the same harness for both. That's just how its categorized on our website. To add a 7-way to your 2023 Ford Ranger you will want the Curt T-Connector Vehicle Wiring Harness item #C56431. This custom-fit T-connector plugs into your…
view full answer...As far as I know the tow package on the 2024 Kia Sorento only has plugs for 4-way wiring, not 7-way. If yours has a 7-way factory port at the rear the only option would be to use an OEM harness from Kia. The Tekonsha OEM Replacement Vehicle Wiring…
view full answer...We have replacement Dexter 7k brake shoe and linings for the Nev-R-Adjust assemblies with the part #K71-676 for the right hand side or the part #K71-675 for the left hand side. These install with included pins and springs and the shoes are bonded to…
view full answer...The Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs #AP233 is the standard suspension kit. For a heavy duty option, we have the Dexter Axle Heavy-Duty Suspension Kit for Tandem Axle Trailers - 1-3/4" Double Eye…
view full answer...Yes, you can replace the existing 4-way with a 6-way socket like the RoadMaster 6-Wire Trailer Connector - Vehicle End #RM-910030-7. If you need the 6-way to 7-way then you can use the #HM47053. If you need the diode kit with everything included then…
view full answer...The harness that you need is an OEM part. A dealership would have it or be able to get it. I would ask them though if there is anything else needed to make the 7-Way active on your 2011 Jeep Wrangler Unlimited. The 7-Way #HM42190 is designed for…
view full answer...The only difference between the Curt Trailer Hitch Receiver part #C13427 and etrailer Trailer Hitch Receiver part #e95ZR which are fits for a 2021 Hyundai Palisade is finish. The Curt hitch has a glossy finish and the etrailer hitch has a matte…
view full answer...To convert the 4-way #CU94FR of your 2021 Hyundai Palisade to a 7-way and 4-way the easiest kit for this is the part #37185 which would plug right into the 4-way of the vehicle and give you both a 7-way and 4-way at the rear of it. This comes with a…
view full answer...It looks like GM has listed your 2022 GMC Acadia for towing so you'll just need to refer to your owner's manual to ensure you don't exceed the towing capacity for your vehicle. Transmission coolers are pretty universal fitments so while…
view full answer...As you can see at the 1:20 mark in the attached video, the factory brake controller harness on your 2017 Jeep Cherokee will be located under the driver's side dash panel. The connector will be grey in color and positioned just to the left of…
view full answer...I would start by inspecting the connector on your trailer and the vehicle to make sure there is not corrosion in the connector which could be causing a bad or weak connection. If there is corrosion in the trailer side connector, you would need to…
view full answer...Related Searches
Filter Your Search
Contact and Help