3 Inch Rise/4 Inch Drop Ball Mount for Curt C40047 RockerBall Trailer Ball

Question

Question:

I have a Curt 40047 rockerball trailer ball and the width of the ball mount must be 2 1/2 inches wide with 1 inch hole. I can not find the width listed any place can you tell me if this mount will work?

asked by: Marcel

0

Expert Reply:

The Curt # C84WR is 2-3/4 inches wide at the ball platform, so it won't work with your # C40047 Curt RockerBall.

This being said, we do offer a ball mount with a similar rise/drop with a 1 inch diameter ball hole that would work. I'd recommend the Draw-Tite # 2753 which has a 7500 lb capacity, a 2-3/4 inch rise or a 3 inch drop.

expert reply by: Mike L

0

Answer 1

Yes, it will Mark. The InfiniteRule Hitch Lock for 2" Toyota Tacoma Hitches item #IR75FR has a longer span to accommodate the Toyota hitch receiver. Which they've recently started expanding to other vehicles besides the Tacoma. You will most…

view full answer...

Answer 2

Hello Hal, Great question! It really would be nice if Toyota kept their receiver the same size as everyone else’s so any standard 2" lock would fit. The good news is that Infinite Rule actually made a lock specifically for the 2024+ Toyota…

view full answer...

Answer 3

The Swagman Traveler XCS - Platform-Style 2 Bike Rack for 2" Ball Mount part #S64664 is an option to do this but it has a 35 lbs. per bike capacity. If your bikes with the batteries removed are less than that this rack will work well. Brophy…

view full answer...

Answer 4

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 5

Yes, you can absolutely use an aluminum ball mount with a stainless steel hitch ball without worry of the ball mount corroding. In fact, there are no aluminum hitch balls so manufacturers suggest the use of stainless steel as it is going to be the…

view full answer...

Answer 6

The Curt Trailer Hitch Receiver part #C13280 for 1987 - 2004 Dodge Dakota includes grade 8 hardware bolts. It is a 2" receiver with a concealed cross tube so the only portion of the hitch that is visible once installed is the receiver portion. I…

view full answer...

Answer 7

There is indeed a garter spring in the #34823 Double-Lip Grease Seal. If you view the product description video, you can briefly see the spring. I'd captured a frame from the video where you can see the spring a bit better.

view full answer...

3 Inch Rise/4 Inch Drop Ball Mount for Curt C40047 RockerBall Trailer Ball

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching