Replacement 2 Inch Adapter Sleeve for Yakima Y02481 SingleSpeed Bike Rack

Question

Question:

Im looking for the hitch sleeve for a yakima singlespeed bike rack. I have a 2 inch hitch and im not sure which sleeve to order.

asked by: Federico V

0

Expert Reply:

The correct adapter sleeve for your Yakima # Y02481 SingleSpeed bike rack is part # Y8890342. The sleeve includes the M8 Allen bolt and wrench.

expert reply by: Mike L

0

Answer 1

Hi Chris, I was able to find the replacement parts for the archived Four Timer (linked below) which is the four bike version of your bike rack that shares the same platform style and it shows the Replacement Hitch Bolt for Yakima HoldUp2, OnRamp, etc…

view full answer...

Answer 2

Yes the Replacement Tongue for Yakima SingleSpeed 1-Bike Platform Rack part #8880841 is designed to work with the original 2" adapter sleeve supplied with the rack from Yakima.

view full answer...

Answer 3

Yakima Mounting bolt #Y8890176 is a 1/2 inch bolt, which measures 4-9/16 inches long. This bolt works with the following bike carriers: Yakima FlipSide (Y02426), DoubleDown 2 (Y02423), DoubleDown 4 (Y02424), DoubleDown 5 (Y02425) BigHorn 4 (Y02405),…

view full answer...

Answer 4

The correct replacement shank adapter for the Yakima TwoTimer 2 Bike Platform Rack is the Replacement Yakima Two Timer 2 Inch Adapter part #8880519.

view full answer...

Answer 5

We do have what you need but I checked with Yakima for you and the part you mentioned will not work with a Yakima FourTimer bike rack. Instead, there are a couple of parts you that you need, and I verified this with Yakima for you: - Replacement…

view full answer...

Answer 6

Hey Mike, yes the Tekonsha trailer wiring harness part #TK85VR that you referenced does fit the hybrid models of the 2025 Mazda CX-50 like you have. This does install to the battery in a different way like you mentioned since the battery is in a…

view full answer...

Answer 7

The adapter for the DoubleDown to work on 2" hitch receivers is #Y8890342 . After checking with my contact at Yakima, the rack you have looks more like a Yakima HighLite 3 (3 bike rack) which was produced from 2011-2016, so the year you…

view full answer...

Answer 8

Hey Mike, so I checked with Curt and their hitch part number 13630 which is our part number #C33MJ does fit the 2025 Mazda CX-50 hybrid. Curt says this actually fits all models of the vehicle actually. What are you planning on using the hitch for?

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Replacement 2 Inch Adapter Sleeve for Yakima Y02481 SingleSpeed Bike Rack

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching