Can You Replace The Plastic Dome On A Ventline Fan With A Metal Dome.

Question

Question:

We need an aluminum lid on the new bathroom exhaust fan 140 as part of the whole fan. We live in Mexico and the plastic just gets burned up so now that we need a new fan - what about a metal lid? HELP!

asked by: Kaye A

0

Expert Reply:

I have a solution for you.

You can use the Metal Low Profile Replacement Cover # BV0534-00 to replace the plastic dome on the Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" x 14-1/4" - White # V2094SP-30.

They are compatible and will work just fine.

expert reply by: David B

0

Penniep

5/25/2025

I bought a 1964 Airstream Bambi II. It has a HENG'S 14" RV Roof Vent with 12 volt fan. Can I replace the plastic cover with your low pro metal cover?

Jerred H.

5/27/2025

@Penniep No, it will not. The metal dome item # BV0534-00 assembly you were looking at measures 14-1/4" by 14-1/4" and connects with a continuous hinge. We do not carry them but from what I can find online your Heng's vent has a 3-point hinge style so this lid would not work. You could replace yours with the Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Metal item # V2110SP-24. This is a brand new assembly and includes the same metal vent.

Answer 1

Hey Chip, yes I agree the metal lid of the Ventline Ventadome part #V2110SP-24 is going to hold up the best over time which would mean you wouldn't have to worry about replacing the lid for a very long time. How old is the trailer?

view full answer...

Answer 2

Yes, the turn knob for the Ventline Ventadome Trailer Roof Vent #V2110SP-24 that you referenced does sit higher than the flange surface of the vent. It would not stick further down than the rest of the assembly so it would not make the ceiling…

view full answer...

Answer 3

It looks like your Sundowner roof vent is a standard 14 x 14-inch size with a continuous-type hinge. For such a vent we offer the Ventline Vent Cover for Old Style Rounded Dome Trailer Roof Vents #BV0554-03 (smoke) and #BV0554-01 (white). We also…

view full answer...

Answer 4

I have a complete replacement roof vent option for you, but there is not a metal version of the Replacement Dome for Ventline Ventadome Trailer Roof Vent - White - Wedge Shape - Plastic #BVD0449-A01. To use a metal lid you will need to replace your…

view full answer...

Answer 5

The Ventline product you reviewed, part #V2092SP-28, is a complete vent assembly intended for a rough roof opening of 14-1/4 x 14-1/4 inches. It consists of a wedge-shaped white plastic dome attached to a galvanized steel frame with hand-crank…

view full answer...

Answer 6

We have several selection for replacement vent cover for Ventline Old-Style Rounded Dome in smoke, #BV0554-03. Or in white #BV0554-01. In wedge shape, white, #BVD0449-A01. In wedge shape, smoke, #BVE0108-03. Rounded dome, white, #BBC0530-01. Rounded…

view full answer...

Answer 7

Replacement vent covers are very specific in terms of what vents they will fit. Metal cover #BV0534-00 is designed to fit Ventline Ventadome roof vent model V2110. If your vent originally had a plastic cover chances are this metal one will not fit. I…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Can You Replace The Plastic Dome On A Ventline Fan With A Metal Dome.

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching