What Rear Suspension do You Recommend for My 2022 Ford E-450?

Question

Question:

what rear suspension do you recommend for my 2022 Ford e-450 class c motorhome single rear wheel 2-wheel drive?

asked by: Dudley

0

Expert Reply:

For great rear suspension for your 2022 Ford E-450 motorhome, I recommend the SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-130-47. These springs come with an easy no-drill installation and do not require any additional maintenance once installed on your E-450. It comes with 1,500 pounds of support that decrease the effects of bumps and sway. To top it all off, these springs are made 100% in the U.S.A.

expert reply by: Bob C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

Hey Trevor, nice truck and trailer! For your 2024 Ford SuperDuty truck, you can definitely go with either option: - SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-127-47 (1,500lb capacity) - SumoSprings Solo Custom Helper Springs - Rear Axle…

view full answer...

Answer 5

Hi Kevin, Thanks for writing in, and for the kind words! Sounds like you are getting things dialed in just right =) Sorry for the delay on this one. I had to reach out to SuperSprings International because nothing was showing up in our fit guide for…

view full answer...

Answer 6

We got you covered Sherrel, thanks for reaching out! If your Jeep Wrangler has a different bumper than the standard factory, please let me know because that would change which base plate is compatible with your vehicle. This flat tow setup is for a…

view full answer...

Answer 7

Hey Ryan, if you wanted to remove the Hellwig setup you have on your 2024 Entegra Esteem you certainly could so that you could install the SumoSprings Maxim Custom Helper Springs #SSR-106-47-1. Do you not care for the Hellwig setup?

view full answer...

Answer 8

Between the two part numbers #SSR-130-54 and #SSR-130-47 the key difference is the amount of support each will provide for your 2021 Ford E-450 Class C motorhome. The 47 provides 1,500 lbs of additional support whereas the 54 provides 2,800 lbs. To…

view full answer...

Answer 9

Hello Roy, thanks for reaching out. Yes, we do have a Blue Ox base plate that will work on your 2021 Jeep Gladiator Rubicon with the factory steel bumper and Warn winch. For that you'll need the following: - Blue Ox Base Plate Kit - Removable…

view full answer...

Answer 10

I'd be happy to assist. For a 2001-2014 E350 van model or 2015-2018 E350 Cutaway, I recommend the SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-130-54 which have a 2,800 lb capacity at 50% compression. These springs progressively add…

view full answer...

Answer 11

Hey Tim, the best option for SumoSprings that fits your 2023 Entegra 24b that is built on a 2023 E450 Class C chassis would be the part #SSR-106-40-1 for the rear and then part #SSF-106-47 for the front. Another thing that will make a huge…

view full answer...

What Rear Suspension do You Recommend for My 2022 Ford E-450?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching