Does the Blue Ox Base-Plate and Receiver Lock Kit Come with Five Locks

Question

Question:

The BX88177 comes with 4 locks, do you have a BX # with 5 locks three 1/2 and two for the BX tow bar? Thanks for your time..

asked by: Danny M

0

Expert Reply:

The Blue Ox Base-Plate and Receiver Lock Kit is offered in a quantity of 2 as part # BX88359, 3 as part # BX88101, and 4 as part # BX88177. The tow bar arms will require one 1/2" lock each and the tow bar shank will require one 5/8" lock or two 5/8" locks if using a high/low adapter. If you order multiple kits you can obtain more locks but the two kits would not be keyed alike.

expert reply by: Conner L

0

Answer 1

Hello Alan, thanks for reaching out. The main advantage of using the Curt RVi Towed Battery Charger #RVI74FR instead of running a simple hot lead is that it properly manages and protects the charging circuit between the motorhome and your Gladiator.…

view full answer...

Answer 2

For Roadmaster base plates and tow bars you'll want to use the #RM-304, since the Blue Ox #BX88177 is only designed for Blue Ox base plates. This kit comes with locks for the base plates and a locking hitch pin so you can secure your Roadmaster…

view full answer...

Answer 3

Hey Dan, I can definitely help you out! For a complete setup you will need the tow bar, base plate kit, safety cables, wiring, and a brake system. I recommend the following: -Blue Ox Base Plate Kit #BLU94ER -Blue Ox Avail Non-Binding Tow Bar #BLU28QV…

view full answer...

Answer 4

Unfortunately, the Roadmaster #RM-316 aren't available keyed alike in multiples greater than the included 2. This being said, I might have an option that would allow you to get as many similar locks as you'd like that would be keyed alike.…

view full answer...

Answer 5

In order to use a hitch-mounted bike rack like the Swagman Original #S64152-2 that you were looking at while towing a vehicle, you will just need to add the Roadmaster Dual Hitch Receiver Adapter #RM-077-4. This adapter will slide into the 2 inch…

view full answer...

Answer 6

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Good afternoon Steve and congrats on the new truck! To flat tow a 2026 Ford Maverick Lariat, I recommend the following parts: Tow Bar and Safety Chains - etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates item #e47ZR Baseplate Kit - Blue Ox Base…

view full answer...

Answer 9

Hey Don, congrats on the new truck and thanks for all of the information! I recommend the Roadmaster Direct-Connect Base Plate Kit - item #RM87NQ. Roadmaster's baseplate kits and wiring set the standards for flat towing as far as quality and…

view full answer...

Answer 10

Hey Steve, thanks for reaching out! The Roadmaster Direct-Connect Base Plate Kit #RM87NQ fits your 2025 Ford Maverick as long as it's the Hybrid model that doesn't have the engine block heater. It doesn't come with the 6-Pin connector,…

view full answer...

Answer 11

Hey Will! I would be happy to help you get the best setup for your 2026 Ford Maverick Hybrid. You will need a tow bar, base plate kit, safety cables, wiring, and a supplemental brake system. I recommend the following: -Roadmaster Direct-Connect Base…

view full answer...

Answer 12

Hello again, Dan. Thanks for writing in. The Demco Stay IN Play DUO Inline Air Pressure Regulator #DM88UV will not be needed for your 2025 Maverick Hybrid. You can still install one to lessen the braking pressure if it seems too harsh, but it…

view full answer...