What Replacement Hardware do I Need for My Draw-Tite # 75547 on My 2011 Honda CR-V?

Question

Question:

I have the hitch 2011 Honda CR-V 75547 but missing hardware

asked by: Dennis B

0

Expert Reply:

In order to order the replacement hardware for your Draw-Tite Hitch # 75547, you simply go to the Replacement Hardware Kit for Trailer Hitches # RHK product page and enter "75547" in the hitch item number box and select "Draw-Tite" from the manufacturer drop-down menu. From there, you will be able to add that replacement hardware to your cart to check out.

expert reply by: Bob C

0

Answer 1

I have attached the installation instructions of the EcoHitch Hidden Trailer Hitch Receiver part #306-X7291 for a 2008 Honda CR-V to this answer page for you. In regards to installation, this is a bolt-on fit with a very clean finished install look.…

view full answer...

Answer 2

The bolt sizes that come with the part #75547 are M10X1.25X30 CL8.8. You can order all new hardware from us with part #RHK too. You would need to select Draw Tite on the drop down menus and then enter the part number 75547.

view full answer...

Answer 3

The Draw-Tite trailer hitch receiver, part #75547, uses 4 hex bolts that are M10 X 1.25 X 30. However, you shouldn't tap the threads uness you absolutely have to as a last resort. I highly recommend cleaning them before tapping them. I've…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

What Replacement Hardware do I Need for My Draw-Tite # 75547 on My 2011 Honda CR-V?

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching