Installation Instructions for EcoHitch Hidden Hitch 306-X7291 On a 2008 Honda CR-V

Question

Question:

Most of your items have the installation instructions posted so we may view before purchase... Where are the instructions for this one?

asked by: Tony R

0

Expert Reply:

I have attached the installation instructions of the EcoHitch Hidden Trailer Hitch Receiver part # 306-X7291 for a 2008 Honda CR-V to this answer page for you. In regards to installation, this is a bolt-on fit with a very clean finished install look. It has a hidden crosstube so you only see the receiver tube once installed. Please note, you do need to trim the rear bumper fascia for installation but this is because of the hidden design. If you don't want to trim then I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75547 buy you'll lose the hidden design aspect.

If you will be towing a trailer then you'll also need the T-One Vehicle Wiring Harness part # 118427 along with the etrailer Ball Mount Kit part # 989900.

expert reply by: Conner L

0

click to enlarge

Answer 1

I'd be happy to help! All of the hitches for your 2011 Honda CR-V weigh relatively the same when it comes to the different classes, and while the Class I hitches definitely weight lighter I recommend using a Class III hitch since they have a…

view full answer...

Answer 2

The EcoHitch Hidden Trailer Hitch Receiver part #306-X7291 which is a fit for a 2008 Honda CR-V does indeed require trimming of the rear bumper fascia but no drilling. I have attached a photo of the required trimming for you which as you can see is…

view full answer...

Answer 3

I would be happy to help you set your 2021 Subaru Outback Premium up with a trailer hitch. The Draw-Tite item #DT73RR you were looking at is a great hitch and is confirmed to fit your Subaru. However, it has a visible crossbar which hangs down below…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 8

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 9

You are correct that both the Curt #C94WR and Draw-Tite #DT22MR you were looking at for your 2022 Hyundai Tuscon are very similar. Both hitches share the same 525lb tongue weight and 3,500lb trailer weight ratings, both share the same hidden…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Installation Instructions for EcoHitch Hidden Hitch 306-X7291 On a 2008 Honda CR-V

Products Referenced in This Question

Featured Help Information

Instructions

Continue Researching