bing tracking image
  1. Trailer Hubs and Drums
  2. CE Smith
  3. 4 on 4 Inch
  4. For 2500 lbs Axles
  5. Hub
  6. 10 Inch Wheel
  7. 12 Inch Wheel
  8. 13 Inch Wheel
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased
CE Smith

CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased

Part Number: CE13110
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$52.72
Retail:$76.17
You Save: 31%
Trailer Hubs and Drums
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Everything you need to replace 1 hub on your trailer fits inside of this handy carrying case. Inner and outer bearings (L44643) and races, and grease seal are all pre-packed in this fully assembled hub with marine-grade grease. Great Prices for the best trailer hubs and drums from CE Smith. CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased part number CE13110 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (29)
  • Q & A (0)
  • Photos

CE Smith Trailer Hubs and Drums - CE13110

  • 4 on 4 Inch
  • For 2500 lbs Axles
  • Hub
  • 10 Inch Wheel
  • 12 Inch Wheel
  • 13 Inch Wheel
  • Pre-Greased
  • Standard
  • L44643
  • 1/2 Inch Stud
  • L44643
  • CE Smith

Everything you need to replace 1 hub on your trailer fits inside of this handy carrying case. Inner and outer bearings (L44643) and races, and grease seal are all pre-packed in this fully assembled hub with marine-grade grease.


Features:

  • Kit lets you replace 1 hub assembly on your trailer
    • Includes bearings, races, grease seal, grease cap, lug nuts, and cotter pin
    • Perfect for storing onboard your trailer in case of an emergency
  • Pre-greased with heavy-duty, marine-grade lubricant
    • Ideal for boat trailers
  • Strong, cast iron hub is painted black
  • Double-lip grease seal helps keep moisture out and grease in
  • Zinc plating on lug nuts, cotter pin, and grease cap helps to limit corrosion
  • Carrying case with handle keeps all the parts in one place
  • Made in the USA


Specs:

  • Application: 2,500-lb axles
    • Maximum wheel diameter: 12"
  • Bolt pattern: 4 on 4"
  • Wheel studs: 1/2" diameter x 1-7/8" long
  • Hub inner diameter: 1.98"
  • Hub flange outer diameter: 5-9/16"
  • Weight capacity: 1,250 lbs


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner and outer bearing: L44643 (1" inner diameter)
  • Races (included)
    • Inner and outer race: L44610
  • Grease seal (included): 12192TB
    • Inner diameter: 1.249"
    • Outer diameter: 1.983"

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


13110 C.E. Smith Trailer Hub Kit - Straight Spindle - 4 x 4 Stud Pattern - 1,250-lb Capacity




California residents: click here


Customer Satisfaction Score:


Customer Reviews

CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - CE13110

Average Customer Rating:  4.7 out of 5 stars   (29 Customer Reviews)

Everything you need to replace 1 hub on your trailer fits inside of this handy carrying case. Inner and outer bearings (L44643) and races, and grease seal are all pre-packed in this fully assembled hub with marine-grade grease.

by:

this was one of many things only used it once on a 4 week 3000+ mile trip and was really happy with the quality and had the piece of mind that if something broke it wasn't going to be anything I bought from etrailer



by:

Cheap junk grease seal fell out and the tension spring popped out had to beat up the dust cap to get it to fit



by:

Perfect replacement for my old hubs.



by:

etrailer shipped my products extremely fast. The packaging was far above other vendors. Easy to install the new pregreased hubs on my boat trailer. I have used and will use etrailer.com again in the future for my needs.



by:

My experience with etrailer has been very positive! I would definitely recommend this company to anyone. Good quality products good prices. Good customer service help getting the correct products. This will be my go to for trailer parts. Janeth was excellent!



by:

Service from etrailer was amazing! They promptly notified me of issues with my order and made sure I got my parts on time. Excellent customer service! The parts themselves are very high quality. I am extremely pleased with this company and will purchase from them again.
I would choose them over other online retailers any day - due to prompt service, fast shipping, quality parts at a good price.



by:

Great costumer service, got the parts I needed on time ,got the wheel hub and bearing kit and my boat trailer is back on the road. Thanks again JP



by:

Can't speak to the quality of product yet,as I just installed, but props go out to etrailer. They make it extremely easy to find what exactly you are looking for with their awesome videos. Thank you for running an excellent online store!



by:

Renovated trailer. These gave me total peace of mind at 80 mph 6 hour road trip



by:

Product fit great and seems to work just fine



by:

Service technician was wonderful.Her name is Lisa she was very patient and did her very best to make sure we got the correct part which we did.Lisa was on the phone with my husband and myself over 45 minutes.a picture is not available because the part was put on the trailer as soon as it arrived. Robert had fishing to do!!!! Thank you for the great service



by:

Good advice, fast shipment, product as described and easy
Install

Robert profile picture

Robert

2/9/2023

Perfect Alls good Excellent wuality



by:

Order is exactly as advertised and shipping is fast. They made my old trailer look fabulous!



by:

Fit like a glove.Would recommend etrailer to anyone



by:

Excellent customer service. Pat went out of her way to help! Thank you! The hubs were very good quality. I will buy again if need them.



by:

Thank you so much for making that happen. Customer for life!



by:



by:



by:



by:

Great Product . TY .



by:

Excellent products and very good service. Cannot thank you enough for the help I received.



by:

Worked good



by:

Great product and quality. Fast shipping too.



by:

Shipped fast and easy to install.



by:

Easily installed, thank you


25
29
Show More Reviews

See what our Experts say about this CE Smith Trailer Hubs and Drums

  • Correct 4-Lug Trailer Hub for StarCraft Trailer with 2,000 Lb Axle
    For a trailer with 2,000 lb axle and 4-lug hubs you'll want to use the Trailer Idler Hub Assembly for 2,000-lb Axles part # CE13110. This is a complete hub with bearings, seal, lug nuts, and grease cap. The hub is also pre-greased so there is no mess.
    view full answer...
  • Hub length of CE Smith Trailer 13110 and 13100
    I went out to the warehouse and found that the CE Smith Trailer Hub Assembly # CE13100 measured about 4-1/4" but that was with the plastic still wrapped around it. If you took the plastic away it would probably measure closed to 4-1/8". The assembly # CE13110 that you referenced is the same exact hub with the only difference being that it uses wheels studs and the part # CE13100 uses wheel bolts.
    view full answer...
  • Replacement Hub for Boat Trailer Using L44643 Bearings
    Assuming you have a # L44643 inner and outer bearing, the correct bearing kit is the # BK1-100. The hub will depend on the bolt pattern you need. These hubs will come pre-greased and include the bearings, races, and grease seals. For a 4 on 4 I recommend the CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased # CE13110. For 5 on 4-1/2 I recommend the Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased # AKIHUB-545-2-LF-1K....
    view full answer...
  • Grease Used in CE Smith Pre-Greased Hub CE13110
    I reached out to CE Smith, who told me the Trailer Hub Assembly with Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased # CE13110 uses a marine grade grease similar to the LubriMatic Marine Trailer Wheel Bearing Grease # L54FR. At one point the grease was in fact red but they changed it to the greener in color grease, with the only difference being the color, as both are marine-grade. I have added a link below to a video review of this grease if you'd like to take a look.
    view full answer...
  • Replacement Hub Compatible With 09067 Outer Bearing
    Unfortunately, we don't offer a hub with that bolt pattern that's compatible with that bearing set. What you have sounds like an old Hadco 3500 lb axle. At this point, your best bet would be to replace your current axle for one that's compatible with modern parts. We offer a limited selection of off-the-shelf axles that have common hub face to hub face and spring center spacing. If you'd care to respond with those measurements, I'd be happy to see if anything we carry would be a correct...
    view full answer...
    Image 1 for
  • Equivalent Hub Assembly to CE Smith Trailer Hub Assembly # CE13100 with Lug Bolts Built In
    The equivalent hub assembly to CE Smith Trailer Hub Assembly # CE13100 that has lug bolts built in is part # CE13110. The Inner and outer bearings (L44643) and races, and grease seal are all pre-packed in this fully assembled hub with marine-grade grease.
    view full answer...
  • Comparing CE Smith Trailer Hub Assemblies CE13100 and CE13110
    Yes, the CE Smith Trailer Hub Assemblies # CE13100 and # CE13110 will both fit on a BT8 Spindle # TRU94FR. The only difference between these 2 hubs is the Hub Assembly # CE13100 is threaded for wheel bolts and the Hub Assembly # CE13110 has wheel studs and lug nuts.
    view full answer...
  • Availability of Trailer Hub to Fit Older Short Spindle on Boat Trailer
    If you have an older trailer with the short spindles then unfortunately we don't have any hubs that will fit. I've gone out to our warehouse and measured a handful of hubs in the past but none of them have a shorter length/height. The only option to use current hubs is to either cut off your spindle and replace it with something like part # TRU94FR so that the CE Smith Trailer Hub Assembly # CE13110 can be used, or purchase new axles entirely.
    view full answer...
  • Replacement Bearings for CE Smith Trailer Hub 13110
    For your trailer hub with 13110 on it the correct bearing kit would be the part # BK1-100 which comes with L44643 bearings.
    view full answer...
  • Is Pre-Greased etrailer Idler Hub Suitable for a Boat Trailer
    The Easy Grease Trailer Idler Hub Assembly for 2K Axles # AKIHUB-440-2-EZ-1K comes with a Lithium complex, multipurpose grease which would be okay on a boat trailer but wouldn't be the best type of grease. Since you'll be using this for a boat trailer I recommend using the CE Smith Trailer Hub Assembly # CE13110 instead because it comes pre-greased as well, but it uses a heavy-duty, marine-grade grease instead so it is much more suitable for a boat application.
    view full answer...
  • Replacement Hub For A 1949 Or 1950 TeeNee Boat Trailer With Short Spindles
    I have a solution for you, but as the short spindles have not been produced for some time now, there will not be a hub that will fit them properly, unfortunately. You will need to replace the spindles with the BT8 Spindle for 2,000-lb Trailer Axles # TRU59FR. If you are or know a good welder, this can be done pretty easily, but you need to make sure the cross tube connecting the two spindles has an inner diameter of 1-3/8" (typically a 1-3/4" outer diameter). Once these are on, the CE...
    view full answer...
  • Replacement Trailer Hub for Boat Trailer with Timken Bearings 07100
    Based on the bearing dimensions that you have you have a 2,000 lb trailer axle so for a replacement hub the part # AKIHUB-545-2-G-2K would work. This has a 5 lug bolt pattern. If instead you have a 4 bolt pattern you'd need the part # CE13110.
    view full answer...
  • Compatible Hub for TRU44FR BTR Spindle
    The # TRU44FR spindle you'd looked at is compatible with an L44649 inner and outer bearing, like what's used by the # CE13109. The hub includes the inner and outer bearing and race, the grease seal, the dust cap and the lug nuts. The hub has a 4 on 4 bolt pattern. For a 5 on 4-1/2 inch bolt pattern, use # AKIHUB-545-2-LFEZ-2K.
    view full answer...
  • Replacement Hubs for 2006 Aliner Expedition Folding Camper with 2.5K Axle
    A 2500 lb axle would typically feature a spindle that's compatible with the L44643 inner and outer wheel bearing. I'd recommend checking the bearing cages on your existing bearings for the reference number just to confirm. We offer 2500 lb capacity compatible idler hubs with a 4 on 4 or 5 on 4-1/2 inch bolt pattern. For a pre-greased hub compatible with a 4 on 4, I'd recommend the # CE13110 or for a 5 on 4-1/2 inch bolt pattern, use part # CE13210. The hubs are sold individually, bearings,...
    view full answer...
    Image 1 for
  • Recommended Pre-Greased Hub With 1-1/16" Inner And Outer Bearings And 4 On 4 Bolt Pattern
    The CE Smith Trailer Hub Assembly w/ Carrying Case # CE13110 uses the # L44643 bearings which are designed to be used with a 1" spindle. As you have a 1-1/16" spindle, it will not fit properly. What you will need is the CE Smith Trailer Hub Assembly w/ Carrying Case # CE13109. This uses the # L44649 bearings and will fit much better.
    view full answer...
  • Replacement Hub For Dexter Idler Hub Using L44643 Bearings and a 1.250" Inner Diameter Grease Seal
    The CE Smith Trailer Hub Assembly # CE13110 is the closest we have filled with bearings and the correct grease seal for your current hub. It is a 4 on 4" bolt pattern and also includes new lug nuts and a grease cap.
    view full answer...
  • Pre-Greased Hub with 4 on 4 Bolt Pattern and L44643 Bearings Already Installed
    The races come pre-installed for hub # AKIHUB-440-2-1K but the bearings will need to be greased and installed manually. We do have a hub that uses the same bearings and 4-bolt pattern; # CE13110. So if you want to avoid having to grease and install the bearings yourself hub # CE13110 is an excellent option.
    view full answer...
  • Correct 4-Lug Hub and Wheels/Tires for 1 Straight Trailer Spindle
    Yes, the CE Smith Trailer Hub Assembly part # CE13110 is a fit for a trailer with a straight spindle 1" diameter which uses L44643 bearings. It has a 4 bolt pattern which will work great with an option like a Kenda 5.30-12 Bias Trailer Tire with 12" White Wheel part # AM30780. This combo uses a 5.30-12 size tire which is 22" diameter x 5.6" wide, it has a load range c rating which can be used up to 1,045 lbs.
    view full answer...
  • How To Find Correct Replacement Wheels and Hubs for Triton XT10 Enclosed Snowmobile Trailer
    I do likely have some options for this trailer but we don't have any way to look up what parts it uses therefore you need to provide some information, namely the axle capacity which should be stamped onto the tag in the center of the beam. It likely uses 2,000 lb axles and in which case you would be looking at either the Trailer Idler Hub Assembly part # CE13110 for 4 lug or part # AKIHUB-545-2-LF-1K for 5 lug. If you have a different capacity you'll need to look through our list below...
    view full answer...
  • Replacement Boat Trailer Hub for 1 Inch Diameter Straight Spindles
    Based on your description it sounds like the hubs on your trailer take L44643 bearings which have a 1 inch inner diameter. We have pre-greased hub # CE13110 that fits that description. I have linked a video review of it for you to check out.
    view full answer...
  • Solution for 60 Inch Replacement Axle For Hubs With L44643 Bearings
    The CE Smith # CE13110 is designed for 2,500 lb axles with # L44643 bearings. All of our available 60" axles use # L44649 bearings. The only solution would be to switch to hubs with the same bolt patter that use # L44649 bearings. The Dexter Trailer Idler Axle w/ Idler Hubs # 20440I-EZ-60 that you looked at would work as a replacement assuming you only need a 2,000 lb capacity. For a 2,200 lb axle we have the # T20BTR-EZ-6048. Since this doesn't come with hubs you will also need # CE13109...
    view full answer...
  • Hub For 2,500 lb Axle on 2015 Aliner Ranger 10 Camper
    The correct hub for a 2015 Aliner Ranger 10 with a 2,500 lb axle is the CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles # CE13110.
    view full answer...
  • Replacement Trailer Hub Assemblies For A 1976 Valley Forge
    I do have options for you however, in order to recommend the correct hub assemblies for your 1976 Valley Forge, I would need to know the inner and outer bearing numbers located on the inside edge of the bearing or if these are not visible, I would need you to use a digital caliper such as the Carbon Fiber Digital Caliper part # PTW80157 to measure both the inner and outer bearing seats on your spindle. I have attached a video that will further explain this process. If your current hubs...
    view full answer...
  • What Spindle Fits CE Smith Trailer Hub # CE13110
    The CE Smith hub part # CE13110 that you referenced matches the spindle part # TRU94FR that you referenced.
    view full answer...


< Previous
12



Do you have a question about this Trailer Hubs and Drum?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Chelsea B
Written by:
Chelsea B
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924