Replacement Bearings, Races, Seals, and Grease Caps for 7K Axle

Published 12/20/2021

Products Featured in This Question

Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K Axles with #84 Spindles

(2918)

$9.46

Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle

(3084)

$20.01

Replacement Race L44610 for Bearings L44643 and L44649 - Qty 1

(1318)

$5.29

Replacement Trailer Wheel Bearing - L44649 - Qty 1

(2217)

$24.70

Replacement Race L68111 for Bearing L68149 - Qty 1

(1318)

$8.11

Replacement Trailer Wheel Bearing - L68149 - Qty 1

(2217)

$19.04

Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2

(2288)

$15.94

Question:

I need some wheel bearings and seals for my Haulmark trailer TSV8520T2. It uses the EZ lube system and is rated at 7,000 lbs total weight trailer and car. Can you tell me your part numbers for the following: Inner bearing and race Outer bearing and race Grease seal EZ lube hub cover with the rubber access seal

asked by: Jeff T

Expert Reply:

Since your tandem axle trailer has a 7K GVWR this means that you have 3.5K axles that use the following parts:

Inner Bearing - # L68149
Inner Race - # L68111
Outer Bearing - # L44649
Outer Race - # L44610
Grease Seal - # 58846 (1.719" inner diameter)
EZ Lube Grease Caps - # RG04-040

The bearings, races, and seals can be found in this kit # BK2-100, so all you'd need are the grease caps # RG04-040 to round out everything you need. Be sure to check what you currently have because even though these are the common parts, there is no rule saying that your axle HAS to use these pars so your spindle could vary slightly.