Recommendation Front and Rear Anti-Sway Bars for Class C Built on the 2011 Ford E-450 Super Duty

Question

Question:

Im looking for front and rear anti sway bars for a 2011 Four Winds BK 28 motorhome on an E450 chassis. Could you tell me the correct part numbers? Thank you.

asked by: Brett B

0

Expert Reply:

For a Class C built on the 2011 E-450 chassis. I suggest the Roadmaster # RM-1139-147 for the rear anti-sway bar and the Roadmaster, # RM-1139-176 for the front.

Please note the linked product review and installation videos below.

expert reply by: Michael R

0

Answer 1

The Roadmaster Exact Center part #RM97MR is a confirmed fit for your 2019 Ford Class C E-450 with JRide.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hi Todd, I know exactly the feeling you’re describing, and you’re definitely not alone. That floaty, pushy feeling at highway speeds, especially when trucks pass, is really common on the Sprinter 3500 chassis with a taller coach like your Tiburon,…

view full answer...

Answer 8

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 9

Hey Ronald, for your 2021 Jayco Greyhawk 27U that is built on a Ford E-450 Class C chassis the Hellwig front sway bar part #HE26GR is a confirmed and would be a great option to improve the handling of your motorhome. I am sorry it's not listed in…

view full answer...

Recommendation Front and Rear Anti-Sway Bars for Class C Built on the 2011 Ford E-450 Super Duty

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching