Roadmaster Steering Stabilizer for 2019 Ford Class C E-450 with JRide

Question

Question:

Which stabilizer can I use for a Class C E-450 Jayco with J-ride?

asked by: David

0

Expert Reply:

The Roadmaster Exact Center part # RM97MR is a confirmed fit for your 2019 Ford Class C E-450 with JRide.

expert reply by: Jameson C

0

Answer 1

Hey Kevin, we have the Roadmaster Exact Center Steering Stabilizer part #RM47MR that is a fit for your 2019 Ford E-450 Class C. I think the issue was that you had a F-450 cab and chassis truck in our fitguide so the results weren't accurate that…

view full answer...

Answer 2

You'll need to start with a 4-way like the part #119250KIT you mentioned which is a fit for your 2012 BMW X5. If your trailer does not have brakes all you would need is the part #37185 as an adapter to convert the 4-way to a 7-way. If you do have…

view full answer...

Answer 3

For a Class C built on the 2011 E-450 chassis. I suggest the Roadmaster #RM-1139-147 for the rear anti-sway bar and the Roadmaster, #RM-1139-176 for the front. Please note the linked product review and installation videos below.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Roadmaster Steering Stabilizer for 2019 Ford Class C E-450 with JRide

Product Page this Question was Asked From

Continue Researching