Hitch Receivers for a 2011 Subaru Impreza Sedan 4D?

Question

Question:

Hello, Wanted to know if this hitch would work on an 2011 Subaru Impreza Sedan 4D? Thank you! :

asked by: Dennis

0

Expert Reply:

The receiver hitch for the 2011 Subaru Impreza four door sedan is the EcoHitch Invisi Trailer Hitch Receiver item # 306-X7279. This fits the WRX and WRX ST models. The Curt Trailer Hitch Receiver item # C11120 you referenced is a confirmed fit for a 2011 Subaru Impreza 5-Door Wagon with quad exhaust. This one does not fit the four door sedans.

expert reply by: Jerred H

0

Answer 1

The Draw-Tite Max Frame Class II Hitch #76209 is not confirmed to fit on the 2011 Subaru Impreza but we do have hitches that will fit your vehicle. Whether or not you have the Sedan or Wagon is going to be the first determining factor. I've…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hi Jeffrey, For a hitch for the 2026 Subaru Outback Wilderness that installs behind the bumper, I recommend the etrailer Class III Trailer Hitch Receiver part #e25TR. The cross tube is totally hidden behind the bumper, and only the hitch receiver…

view full answer...

Answer 6

Hey Nelson, welcome back and congrats on your new SUV! We get our information directly from Curt and their item #C13409 and item #C47HR hitches fit all models of the 2025 Subaru Forester including the hybrids. This is why we don't list a hybrid…

view full answer...

Answer 7

Pierre, the Bauer Products Camper Door Lock #BA65FR will work great as a replacement for your current TriMark door lock. This door lock will fit cutouts that are 5-1/4" wide and 4-1/2" tall, and can also be keyed alike to other Bauer locks,…

view full answer...

Answer 8

The Tekonsha Wiring Harness part #118573 is confirmed to fit your vehicle. This is a plug and play wiring kit kit that will require one circuit be ran from the converter box to the vehicle's positive battery terminal. We haven't had an…

view full answer...

Answer 9

I have a solution for you but the CM-SP2 spacers are not available for individual sale. However, there is a complete set of replacement hardware available for the Curt Trailer Hitch item #C11254. This complete set will allow you to install your hitch…

view full answer...

Answer 10

As long as your 2014 Subaru Impreza isn't a WRX or WRX STi model (and it sounds like it isn't), the Curt #C11286 is the correct fit. If you DO have the WRX or WRX STi, you'd then need the #C11120. If you'll be doing some light duty…

view full answer...

Answer 11

Yes, rear fascia trimming is required to install the EcoHitch part #306-X7261 on your 2014 Subaru WRX Hatchback. The rear fascia has to be cut so that the shank of the hitch will fit. I attached a picture that shows where you'd need to trim the…

view full answer...

Answer 12

As long as your 2011 Subaru WRX hatchback isn't a STI model we have the EcoHitch part #306-X7261 that fits with the quad exhaust which is a hidden hitch with a 2 inch opening or we have the Curt part #C11120 which is a 1-1/4 inch hitch.

view full answer...

Hitch Receivers for a 2011 Subaru Impreza Sedan 4D?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching