What Is The Best Hitch For Mazda CX-30 2021

Question

Question:

What is the best hitch to use it for a Bike carrier. My car is a Mazda CX-30 2021. I would appreciate your help. Thanks a lot.

asked by: Marlyn G

0

Expert Reply:

I recommend going with the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" # EH55VR. It has a 2 inch receiver that will be able to take any accessory and gives you the option to pull a trailer if the need ever comes up in the future. It also has a sleek look and almost appears to be a factory component. I like that because it doesn't stick out and isn't hard to miss.

My second choice would be the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C49CR. If you know you are never going to pull a large trailer or anything heavy this will be a great choice. It has a 1-1/4 inch receiver opening and a concealed cross tube.

Both of theses hitch receivers can carry racks like the Hollywood Racks Trail Rider Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount # HR200Z.

expert reply by: David B

0

Answer 1

Hello Peter, Yes, you can most definitely use the holes on the side of the frame instead of making that center hole larger to get the hardware through for the Curt #C49CR. Our installers try to follow the manufacturers instructions, looks like…

view full answer...

Answer 2

There is a 1-1/4" trailer hitch receiver that fits your 2021 Mazda CX-30, and the best option is one from Curt: - Curt Trailer Hitch Receiver #C49CR The reason to go with the Curt #C49CR on your '21 CX-30 is because it has the best ground…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

Hey Kelly! The Curt 13146 fits 2016 - 2022 Honda Pilot. What you need for your 2026 Honda Pilot is the Curt #C22HR. This has a bolt-on installation and does not require any cutting or trimming of the bumper so you won't be modifying the vehicle.…

view full answer...

Answer 9

Hey Mike, so I checked with Curt and their hitch part number 13630 which is our part number #C33MJ does fit the 2025 Mazda CX-50 hybrid. Curt says this actually fits all models of the vehicle actually. What are you planning on using the hitch for?

view full answer...

Answer 10

What you describe isn't unheard of. Due to the rigid nature of the hitch construction, once the #EH55VR is installed on your 2021 Mazda CX-30 it's position is fixed, and it would sit in exactly same spot on any Mazda CX-30 of the same model…

view full answer...

What Is The Best Hitch For Mazda CX-30 2021

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching