Blue Ox Adapter To Attach Aventa 2 Tow Bar To Maximus 3 Tow Loops on a 2020 Jeep Gladiator

Published 11/19/2021

Products Featured in This Question

Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars - 7/8" D-Rings

(231)

$129.13

Roadmaster Stop Light Switch Kit

(671)

$74.08

Question:

I have a 2020 jeep gladiator. I have an Aventa 2 tow bar. I have maximus 3 tow loops. What adapter do I need for tow to d-loop? Tks

asked by: Edward S

Expert Reply:

The Blue Ox Aftermarket Off-Road Bumper Adapter # BX88357 is the correct adapter for your Aventa 2 tow bar to connect to the Maximus 3 tow loops on your 2020 Jeep Gladiator. The adapters use a use a 7/8" pin and will fit the 5/8" mounting point of the tow loops.

I do recommend installing the Blue Ox Tow Bar Wiring Kit # BLU79FR as this kit is designed to plug directly into your tail light connector with no wire slicing needed. This will allow you to use the tail lights on your Jeep rather than having to rely on portable lights that will have to be installed and removed when connecting or disconnecting your Jeep.

If you don't already have a portable braking system for the Jeep I recommend the Brake Buddy Select 3 Portable Supplemental Braking System # HM39524 as most states will require a braking system on your Gladiator due to the weight. To use the Brake Buddy you will need a Roadmaster Stop Light Switch Kit # RM-751497. The switch kit tells the Brake Buddy when the pedal is pushed so that it knows when the pedal is pressed and will relay the information to you in your tow vehicle via the wireless remote.

expert reply by: Bud M