Spare Tire Holder For A 2022 Winnebago Travato

Question

Question:

We have the same travato as shown on your site. We have the same bike rack which we live and use. How can we use your hitch spare tire holder? Do u make a spare tire holder for the ladder on the travato?

asked by: Francine S

0

Expert Reply:

To use the hitch mounted spare tire holder like # RM-195225 you will slide the spare tire holder into your receiver opening on your hitch, and from here bolt your spare tire to the mounting plate of the spare tire holder.

As far as a spare tire holder for your ladder, we unfortunately do not have anything.

expert reply by: Bryce D

0

Answer 1

Hey Pepper! We have the motor you need but it is not the #TUS24FR. The #LC168956 you referenced is the Lippert Venture Actuator and High Speed Slide-Out Motor. Since you just need the motor the correct replacement part is the #LC295380. If you have…

view full answer...

Answer 2

Thanks for the info you listed. Based on that the correct replacement motor is the part #LC295380.

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 8

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 9

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 10

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Spare Tire Holder For A 2022 Winnebago Travato

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching