5th Wheel Puck Adapter For 2022 GMC Sierra 2500 For Pullrite SuperGlide 2900

Question

Question:

5th wheel adapter for super glide 2900 to 2022 gmc 2500 with 5th wheel prep pack. what puck adapter will fit the gmc truck and the super glide hitch?

asked by: Norman R

0

Expert Reply:

The Pullrite SuperGlide 2900 5th wheel hitch fits industry-standard base rails, and we do have an adapter that will allow you to use that hitch in your 2022 GMC Sierra 2500 with the 5th wheel prep package:

- Demco 5th Wheel Rail Adapter for Chevy/GMC OEM 5th Wheel Towing Prep Package # DM6333

The Demco Adapter # DM6333 will simply fit in your puck system and you'll install the SuperGlide directly in it. The adapter has a 21,000 lb capacity as well so it is enough to meet the 20,000 lb rating of your SuperGlide.

expert reply by: Kyle S

0

Answer 1

Hey Nick! What you need is the Adapter Rails for 5th Wheel Hitch - GM Towing Prep Package #PUL69RR. This will allow your PullRite SuperGlide 2900 #PUL63RR to fit the puck system on your 2024 GMC Sierra 2500.

view full answer...

Answer 2

There are ways to use your current 5th wheel hitch in the factory puck system in your 2022 GMC Sierra. But the correct way will depend on what 5th wheel hitch that you have. If your 5th wheel hitch uses industry standard mounting points, then you…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 9

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 10

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 11

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 12

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

5th Wheel Puck Adapter For 2022 GMC Sierra 2500 For Pullrite SuperGlide 2900

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching