See what our Experts say about this Timken Trailer Bearings Races Seals Caps

• Timken Replacement Bearings and Brake Assemblies for 2021 Dutchmen Voltage 3845
  Hey Roy, while we don't have a Timken bearing kit we can piece together the correct components as we do have them individually. For the outer bearing you would want the part # TMK75FR, for the inner # TMK44FR. For a seal part # 10-36 for a pair. Then for a set of self adjusting brake assemblies for an 8k trailer axle you would want the part # 23-434-435. Do you know what brand of axles you have? These fit Dexter and Lippert which are the most common.
  view full answer...
• Do I Have to Use Timken Races with Timken Bearings, or can I Use Mine that were Made in China?
  Hello Dennis, You can use your current Chinese races, and just get the bearings from the Timken Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, GS-2125DL Seal # TMK32VR. You will want: - Inner bearing: Timken Replacement Trailer Wheel Bearing - 25580 # TMK44FR - Outer bearing: Timken Replacement Trailer Wheel Bearing - 14125A # TMK54FR Also, don't forget some grease seals if you do not already have some on hand. - Timken: Timken Grease and Oil Seal - Double Lip - I.D. 2.125"...
  view full answer...
• Do Kodiak Disc Brakes Fit 5,200 lb Timbren Axle-Less System With 4" Lift
  Hi Lee, Yep, each of the following parts you listed will indeed work together. The spindle on the Timbren system is correct for those disc brakes, and the bearing kit is also correct. So you can use each of the following: - Timbren Axle-Less Trailer Suspension - 4" Lift - 5,200 lbs # TASR5200S03 - Kodiak Disc Brake Kit # K2HR526DKG - Timken Bearing Kit # TMK32VR As for the actuator, the type you asked about isn't something that we offer; in fact I'm not sure if that type (if I'm correctly...
  view full answer...
• Availability of Timken Bearings for Dexter 7k Axle
  Hey Roger! Assuming your hub uses the standard 7k bearings we have the Timken 14125A # TMK54FR and Timken 25580 # TMK44FR. If you have the original Dexter hubs on there it is safe to assume these are correct. If you're looking for a full bearing kit you will need to figure out if your grease seal has a 2.125" or 2.25" inner diameter. The # TMK32VR is the 2.125" and the # TMK92VR is the 2.25" kit. If you aren't sure I can use the S/N off your axle tag to identify it just let me know below.
  view full answer...
• Correct Bearing Kit for 2019 Jayco North Point 315RLTS
  Based on the GVWR of your 2019 Jayco North Point 315RLTS it does seem like you have 7k axles. I recommend verifying this information to be sure. These axles typically use the # 14125A outer and # 25580 inner bearing found in the Timken # TMK92VR. However, there are two different grease seal sizes used for this axle capacity so you will need to identify the correct grease seal before picking up a bearing kit. The # TMK92VR uses a 10-36 seal with a 2.250" inner diameter. If you find that...
  view full answer...
• Timken Bearing Kit that Fits 2025 Brinkley Model Z Air 310
  Hey Cliff, your 2025 Brinkley Model Z Air 310 comes with a dual 7k axle setup so for a Timken bearing kit you would want the Timken bearing kit part # TMK32VR. Are you just wanting to have a spare set on hand?
  view full answer...

Do you have a question about this Trailer Bearings Races Seals Cap?