Replacement Axle Needed for 3,500 lb Dexter Axle
Updated 11/03/2021 | Published 10/31/2021
Products Featured in This Question
Question:
I need a new axle for a trailer. The original is by Dexter. The axle tag has the following information: Dexter Axle P-15 Model SLR SN D 5308076
asked by: Shelby W
Expert Reply:
Thank you for the information! According to my contact at Dexter Axle you have a 3,500 lb axle with a hub-face measurement of 96.60". We have the Dexter Trailer Axle Beam with E-Z Lube Spindles # 7359765 which has a hub-face measurement of 95" but you'll need to check and see if the spring-center measurement of 80" will work for your trailer (see attached photo). If not you can have a qualified welder cut off and weld on new spring seats with part # TRSS238.
This axle is also available with idler hubs as part # 7359765-I as well as an electric brake setup as part # 7359765-EB, both of which use a 5 on 4-1/2" bolt pattern.
The options mentioned above are for standard leaf-spring applications. If you happen to have a torsion axle with the moving arm then you can use a Timbren Axle-Less solution instead. This is available as a spindle-only with part # ASR3500S05, an idler hub with part # A35RS545, or the whole brake kit with part # A35RS545E.
Attached are some videos for you to check out.
(click to enlarge)
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 80 Inch Spring Center
- 95 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" - 3,500 lbs
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Search Results: l68149
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Q&A: Comparing 95" Trailer Axle Beam with Easy Grease Spindles and Dexter Trailer Axle Beam with E-Z Lube
- Shop: Trailer Hitch
- Shop: Replacement Trailer Hub Bearing - L68149
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Search Results: grease fittings
- Search Results: 3500 lbs trailer axles
- Search Results: gs 1719dl
- Search Results: bearing kit
- Search Results: 3000 lbs axle trailer bearings races seals caps
- Video: Complete Breakdown of the Bearing Kit for Trailer Brakes with 8" Hub/Rotor
- Video: A Closer Look at the Replacement Trailer Hub Bearing
- Video: Review of the Grease Cap Plug for E-Z Lube Grease Caps
- Video: Hands-On with the etrailer Hub Bearing Kit
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Video: Trailer Axle w/ Electric Brakes Feature Review
- Video: Dexter Trailer Axle w/ Electric Brakes Feature Review
- Video: Best Generator Options
- Q&A: Recommended Replacement Straight Axle for a Carry-On Trailer
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Should the Grease Bolts Be Tight on the Dexter DX7.5 Drop-N-Go Brake Actuator?
- Article: How to Measure a Trailer Axle
- Q&A: Do You Carry a Axle Rated for 3,500 with Hub Face to Hub Face of 94", of do I Need the 95"?
- Q&A: Correct Replacement for Quality 3500 Lb 95 HF 80 SC Trailer Axle
on Trailer Axles
