Customers compare e43SR to these similar products
Products Featured in this Video
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this trailer axle with electric brakes. This is going to be a great option for replacing an axle on your trailer, whether you currently have an idler axle and your needing to switch it out so that you can get brakes put on there, or if you currently have an axle like this with electric brakes and something's not… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Hello 89 5, We do have a 3,500 lb axle with 89 inch hub face to hub face and 74 inch spring center to spring center that will work with a hub that has a 5 on 5" bolt pattern, but the hub just needs to be purchased separately as they don't…
view full answer...Assuming your tires are in good shape without any bulges the easiest way to determine if you have a bent spindle is to take a straight edge that is longer than the tire and lay it across the tire parallel with your trailer frame and then measure the…
view full answer...If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…
view full answer...There really isn't a particular maximum trailer weight that is used to determine when brakes need to be added to both axles of a tandem axle setup. While I do still recommend checking your local laws, I am also not aware of any general laws that…
view full answer...From what I have found, the axle you are talking about is the T-35 85/68.5 measuring 85" hub face to hub face. This is not an axle we have a direct replacement for unfortunately. I do, however, have an available replacement option. The Timbren…
view full answer...From everything I could find, the AL-KO T35 axle will use the same 4-Bolt Pattern as the Dexter Electric Trailer Brake Kit #23-26-27. With that being said, the mounting flange bolt hole distance the will fit will be 2-7/8" apart on center, so I…
view full answer...The #35545E-ST-89 does not come assembled. I attached a picture that shows how all of the components will show up. You will have to assemble everything like what is shown in the install video I attached.
view full answer...The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…
view full answer...I would be happy to recommend everything you will need to add electric trailer brakes and new taillights to your 1996 Tandem axle car trailer, but you will need to verify a few aspects of your trailer first. First things first you will want to make…
view full answer...When replacing trailer leaf springs we strongly recommend you replace them in pairs. I would urge you to get a set of matching properly rated springs for your trailer as soon as possible. If you look on the frame of your trailer there should be a…
view full answer...Dimensionaly the leaf spring part #e44SR that you referenced would be perfect for your Kodiak 160 UltraLight camper. It's 1/4 inch shorter than the spring you measured which works out well since old springs stretch a bit over time. This is a…
view full answer...The 4-Leaf Double-Eye Spring #e68SR may be a fit for your 2021 Cherokee Arctic Wolf 287BH, but there are a few things that will need to be confirmed before solidifying an answer to your question. Unfortunately, trailer/camper manufacturers do not…
view full answer...