2026 Brinkley G4170 Replacement Hub Seals, Brake Pads and Caliper Bolts
Updated 11/18/2026 | Published 11/17/2026 >
Products Featured in This Question
Question:
Greetings - Im having problems finding the parts I need. I have MOreryde IS 2.0 with 8K axels. I need to do a bearing repack on my 3 axle 2026 Brinkley G4170. I know I need replacement seals. I would like to carry an extra set of Brake Pads, and the bolts that attach the brake pad caliper to the wheel I forget what the name of it is. The part numbers I think I need are: 6x UO138-033 Seals 2x UO138-139 DeeMaxx 2x Caliper bolts no part number. But, I cant find these in your store, can you help me? My trailer has 12 months and about 10k miles. What else should I be looking to do for PM on the suspension? Im doing my greasing of zerks every 3k miles. Thanks very much.
asked by: Matthew C
Expert Reply:
Thank you for reaching out and for providing the part numbers and details about your Brinkley G4170!
I was able to locate MORryde's official Independent Suspension 2.0 replacement parts list, and the good news is that you've identified the correct grease seals and brake pads.
For your three-axle, 8,000-lb suspension setup, here's what I found:
Grease seals — UO138-033
MORryde identifies these as 2.25-inch grease seals, equivalent to Dexter # 010-036-00.
We carry these as part # RG06-070, which includes two seals per package. You would need three packages to service all six wheels.
DeeMaxx brake pads — UO138-139
We carry DeeMaxx replacement brake pads for 7,000–8,000-lb applications as part # DE78VR.
These include enough pads for two wheel assemblies. I'd just want to verify your exact DeeMaxx caliper model before guaranteeing compatibility.
Caliper bolts — UO138-136
I also found the missing caliper bolt number in MORryde's documentation.
Unfortunately, I haven't confirmed a direct replacement for these bolts in our current selection. I'd recommend checking with MORryde for availability.
Regarding maintenance, MORryde recommends repacking the wheel bearings every 12,000 miles or once annually, whichever comes first.
Since your trailer is approximately one year old and has 10,000 miles, this is a good time to perform that service.
I'd also recommend inspecting the disc brake pads and rotors, calipers, brake hoses, rubber suspension springs, and shock absorbers while you're servicing the bearings.
Your practice of greasing the suspension fittings every 3,000 miles is certainly diligent. MORryde specifies a longer interval, so you're already ahead of that schedule.
One additional recommendation would be to watch for unusual tire wear, which can indicate that the independent suspension needs an alignment.
Product Page this Question was Asked From
Grease Seals 10-36 - Double Lip - I.D. 2.250" / O.D. 3.376" - 5.2K to 8K Axles
- Trailer Bearings Races Seals Caps
- Seals
- EZ Lube Seals
- Grease Seals - Double Lip
- 2.25 Inch I.D.
- 3.38 Inch O.D.
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- TruRyde
more information >


Matthew C.
11/18/2026
Thank you so very much. This was fantastically helpful. Have a great day.