Lamps of Trailer Pulled By 2016 Ford Escape Stay Illuminated With Vehicle and Lights Off
Updated 11/01/2021 | Published 10/22/2021
Question:
I purchased your trailer wiring harness for my 2016 Ford Escape. It does not have the factory installed trailer wiring. My nephew installed it and dont want to bother him with the problem. The light stays on even when the car is not running or the lights are turned off. Can you tell me what to check in order to fix it?
asked by: Donald T
Helpful Expert Reply:
The most likely reason for the trailer wiring harness to put out voltage with the vehicle shut off is a shorted converter box which is caused by a short circuit in the trailer wiring.
You can confirm this by removing the 10A fuse in the yellow fuse holder that should be connected to the vehicle's positive battery terminal. If removing the fuse causes that light that remains on to shut off, it confirms that the converter box has a short circuit in it. You'll need to identify the short in the trailer wiring by tracing the lighting cirucits back from the trailer connector to each lamp. You'll want to look for pinched wires or wires with worn or cracked insulation. Anything that would let the copper inside the wires to short out on the trailer frame. Once the short is located and repaired, you'll need to replace the # C56329 wiring harness.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Hidden
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: How to Hardwire a Trailer Connector on a 2008 Mercury Mariner
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2010 Ford Escape
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C56329 Review
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2012 Ford Escape
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Search Results: trailer wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer tires and wheels
- Shop: Suspension Enhancement
- Video: How to Choose a Trailer Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
- Search Results: trailer jack
- Video: Curt Powered Tail Light Converter Installation - 2023 Kia Telluride
- Q&A: How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Article: How to Measure for Trailer Hitch Drop
on Custom Fit Vehicle Wiring
Donald T.
10/29/2021
I had just rewired the trailer and there is no dead shorts, or bare wires. Why didn't the fuse in light kit blow before it would of shorted out the converter box? I'm not going to purchase another kit if it is not made to more or less protect it's self from shorts.