Distance From Hitch Pin Hole To Ball Shank Center On a Curt TruTrack Weight Distribution # C17499
Updated 10/18/2021 | Published 10/15/2021
Products Featured in This Question
Question:
Distance from center of pin hole to center of ball shank hole?
asked by: Dean
Expert Reply:
The Curt TruTrack Weight Distribution System # C17499 is going to be approximately 12" from the hitch pin center hole to the center of the ball shank hole. The exact measurement will vary between vehicles as the head of the hitch is adjustable for pitch making this measurement change depending on its adjustment.
If you are needing the hitch ball to be further away from your 2017 Ram ProMaster 2500 you can use the Equal-i-zer Weight Dist Shank # EQ90-02-4600 to gain an additional 6" from the included shank that comes with the TruTrack System.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Trunnion Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- 2 Inch Ball
- 2-5/16 Inch Ball
- Fits 2 Inch Hitch
- Allows Backing Up
- 600 lbs
- 700 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Towing Mirrors
- Shop: Big Truck Big RV Tongue Weight Scale w/ Storage Bag for Trailers - 2,000 lbs - Adjustable
- Shop: Trailer Hitch
- Shop: Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW
- Shop: K-Source Universal Towing Mirrors - Clip On - Convex Mirror - Qty 2
- Shop: Curt Hitch Extender for 2" Hitch Receivers - 8" Long
- Shop: Equal-i-zer Weight Dist Shank - 18" Long - 8" Rise, 4" Drop - 600 to 1,400 lbs TW
- Search Results: hitch extender
- Q&A: Can a Trailer Hitch Extender be Used with Weight Distribution
- Q&A: Why Does Use of Hitch Adapter/Extender Reduce Hitch Tongue Weight and Trailer Weight Ratings
- Q&A: Comparing The etrailer # e99044 And Big Truck Big RV # BTBRV44FR Tongue Weight Scales
- Shop: Curt Weight Distribution Shank - 14" Long - 7" or 7-1/2" Drop - 1,500 lbs TW
- Shop: Roadmaster Dual Hitch Receiver Adapter 8 in Drop/Rise 10K GTW For Flat Towing
- Shop: Brake Controller
- Shop: Suspension Enhancement
- Q&A: Where to Install the Mounting Brackets of the Curt TruTrack # C17499 Compared to the Hitch Ball
- Video: Let’s Check Out the RoadActive Suspension Custom Leaf Spring Enhancement Kit-RAS34FR
- Video: Curt Weight Distribution C17535 Review
- Q&A: Will Curt TruTrack Weight Distribution Work on R-Pod Trailer With 300 lb to 400 lb Tongue Weight
- Q&A: Determining Correct Bolt Hole To Install RAS Leaf Spring Enhancement RAS3612 On 2008 Ford F-150 2WD
- Q&A: How to Choose Correct Bracket Mounting Hole for 2024 Chevy Silverado 3500 RoadActive Suspension Kit
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Search Results: trailer hitch
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer wiring
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer tires and wheels
- Article: How to Measure for Trailer Hitch Drop
on Weight Distribution Hitch
