Recommended Trailer Hitch Receiver For 2021 Jeep Grand Cherokee L

Question

Question:

I just picked up a 2021 Jeep Grand Cherokee L and am wanting a trailer hitch receiver. What do you recommend?

asked by: Bill

0

Expert Reply:

For your 2021 Jeep Grand Cherokee L we have the Curt Trailer Hitch Receiver # C97JR which is a confirmed fit.

This hitch has a 750 lb tongue weight rating and a 7,500 lb trailer weight rating so it will be plenty strong for carrying a bike rack or cargo carrier, or for using a ball mount to tow a trailer. I do recommend checking the owner's manual of your vehicle and using the lower rating between the hitch your Jeep.

If you will be towing a trailer you will also need a vehicle wiring harness # C27BR, and a ball mount, hitch ball, and hitch pin and clip which can all be found in the etrailer Ball Mount Kit # 989900.

expert reply by: Samuel C

0

Draw-Tite Trailer Hitch # DT57GR Installed On 2021 Jeep Grand Cherokee L
(click to enlarge)

Answer 1

Yes, there is. To add a hitch to a 2024 Jeep Grand Cherokee 4xe you will want the Curt Trailer item #C96NR. This hitch is custom fit and bolts to your Jeep with included hardware. This is a class III hitch with a 2" receiver. It has a 7,500 lbs…

view full answer...

Answer 2

To add a trailer hitch to your 2023 Jeep Grand Cherokee L, I recommend the Curt Trailer Hitch item #C97JR. This hitch is custom fit and bolts to your Jeep with included hardware. I really like the Curt hitch because it installs behind your rear…

view full answer...

Answer 3

The best hitch for your 2022 Jeep Grand Cherokee L is going to be the Curt item #C96NR you were looking at. This hitch is custom fit and bolts to your Jeep with included hardware. I really like this hitch because it mounts behind your Jeep's rear…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Recommended Trailer Hitch Receiver For 2021 Jeep Grand Cherokee L

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching