Comparing the EcoHitch # EH36SR and EcoHitch Stealth Trailer Hitch # 306-X7202

Question

Question:

I need a hitch for my 2021 Tesla Model S and was comparing the EcoHitch EH36SR and the Eco-Hitch 306-7202. Can you compare the two hitches for me?

asked by: Harold F

0

Expert Reply:

TheEcoHitch Stealth Trailer Hitch Receiver - Custom Fit - 2" # EH36SR and the Hitch Stealth Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # 306-X7202 1 are both good hitches that will fit your 2021 Tesla Model S. They are nearly identical except for the size of the receiver opening.

The receiver opening for the Eco-Hitch # EH36SR is 2" x 2", while the # 306-X7202 has a 1 1/4" opening. They both haveba maximum tongue weight of 300 lbs and a maximum gross trailer weight of 2000 lbs.

They both have a nice thick powder-coat finish that will last a very long time.

Between these two hitches I would recommend the # EH36SR, as having the 2" receiver opening will give you many more options down the road for hitch accessories. I always recommend the 2" opening when it is available.

expert reply by: Thomas M

0

Answer 1

Hey DJ, yes the EcoHitch part #EH36SR that you referenced is a totally hidden trailer hitch that fits your 2026 Tesla Model S and would be what you would want. When not in use the lower hitch opening gets removed so that it's completely out of…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Comparing the EcoHitch # EH36SR and EcoHitch Stealth Trailer Hitch # 306-X7202

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching