Which Leaf Springs and Hangers Are Needed For 2000lb Trailer Axle e84YR?

Published 09/16/2021

Products Featured in This Question

Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs

(399)

$219.67

Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear

(378)

$48.53

CE Smith U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4" Long U-Bolts - Zinc

(977)

$35.42

3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long

(2042)

$31.06

Question:

DO YOU HAVE A KIT FOR THIS AXLE KIT, THAT HAS SPRINGS AND ETC FOR THIS AXLE??

asked by: KRISTY R

Expert Reply:

I would be happy to piece a kit together for you, but there are not any leaf spring kits designed for axles such as the Trailer Axle With Idler Hubs # e84YR you were looking at.

You will need the Single-Axle Trailer Hanger Kit # APS4 with 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles # e84SR and U-bolt kit # CE23000 to secure the axles to the leaf springs.

The hangers will get welded to the trailer frame around 20" apart from center to center of the mounting holes, and you will want to mock this up first to fine tune the kit to your specific trailer.

To find where to place the axle you will need to take a look at the included help article that goes over how to determine where to place a trailer axle.

I included videos of the products mentioned for you to take a look at.