What is the Total Length of the Trailer Axle with Idler Hubs With a 60" Hub Face
Updated 12/10/2025 | Published 12/08/2025 >
Products Featured in This Question
Question:
What is the TOTAL length of the e84YR Axle? I am building a lightweight aluminum utility trailer to replace my old trailer which was built on a motorcycle trailer. I am considering building a 4x6 trailer. The trailer must fit inside of my existing trailer shed. That is the reason for asking for the total length. I realize my standard 4.80-12 inch tires may add to the total width. Thank you.
asked by: Robert E
Expert Reply:
Hey, Robert.
I took a walk out to our warehouse to check the total length of our etrailer axle, part #e84YR, for you. The axle itself measures 65" long. Once you install the hub and grease cap, that will add to the overall length. To play it safe, it’s reasonable to assume an additional 4" total.
So you’re looking at a total length of about 69". If the inside of your trailer is only 6' wide, you wouldn’t have much wiggle room at all.
I attached a photo of a fellow customer that installed the axle and used 175/80-13 tires. They are wider tires than your 4.80-12 tires that you wan to use but thought it would still be a good visual to see.
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- 48 Inch Spring Center
- 60 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Video: Review of Dutton-Lainson Trailer Winch - Removable Handle Kit - DL84FR
- Q&A: Weight Capacity of Weld-On Hinge w/ Brass Bushing and Grease Zerk
- Shop: Taskmaster 4.80R12 Radial Trailer Tire - Load Range C
- Shop: CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K
- Shop: Replacement Hitch Pin with Lock Pin and Cable for Demco Kar Kaddy SS - Qty 1
- Shop: Replacement Nail Head Striker Pin for UWS Boxes with Paddle Handles - 1/4" Diameter
- Shop: DeeZee Replacement Premium Tool Box Mounting Kit
- Search Results: trailer light brackets
- Search Results: ca5290b
- Q&A: Highest Speed Rating for a 4.80 x 12 Trailer Tire
- Video: A Closer Look at the Blaylock EZ Lock Gooseneck Coupler Lock on a Big Tex Trailer
- Q&A: Axle Tube Diameter and Spring Seat Dimensions of etrailer Brand e84YR 2000 lb Capacity Axle
- Q&A: Which Leaf Springs and Hangers Are Needed For 2000lb Trailer Axle e84YR?
- Q&A: Trailer Axle For 1,500 lb 5 x 8 Homemade Trailer
- Q&A: Availability of 60 inch Long Trailer Axle
- Shop: Steel Spoke Trailer Wheel - 12" x 4" Rim - 5 on 4-1/2 - Galvanized Finish
- Q&A: Solution for Replacement Hubs on Northern Tool Ultra-Tow 49803 Aluminum Trailer
- Video: Set up: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package on a 2013 Land Rover Evoque
- Search Results: weld on hinge
- Search Results: dual trailer jack
- Search Results: trailer tires and wheels
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Search Results: trailer wiring
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Article: How to Measure Your Trailer Wheel Bolt Pattern




Robert E.
12/9/2025
Thank you so much, Gwendolyn! It is going to be a tight squeeze with that axle. I will check to see how much room I have if any. In the meantime I will be ordering two 4.80-12 high speed tires to replace the ones on my present trailer.