Replacement Hub/Drum and Brake Assembly for AL-KO 7230 Hub/Drum Assembly

Updated 09/13/2021 | Published 09/12/2021

Products Featured in This Question

etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K

(3025)

$161.45

Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased

(1221)

$91.22

Question:

Hello, I have recently purchased a used Texas Bragg dual axle with 3500lb axles, angle iron frame and rails what brake hub setup would I need to replace the old brakes? They currently are inoperable as brakes. I found the Code AL-KO 7230 stamped on the hub. Regards

asked by: Doug R

Expert Reply:

From what I have found, the replacement for the AL-KO 7230 hub and drum assembly is the Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased # AKHD-545-35-K.

For brakes, I recommend the Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA. These self-adjusting brakes match your hub and drum assembly as well as your axle capacity.

I have attached a couple reviews and installation videos for your reference.

expert reply by: Robin H