Replacement Wheel Studs with 2-1/2 Inch Length and .54 Inch Knurl Diameter

Updated 06/10/2025 | Published 05/03/2019

Question:

I am sure these will work for my trailer, but I just want to make sure you dont have the exact ones I am looking for. Mine are 1/2 X 20 54 KNURL 2.50 length 1.28 shoulder 1.00 thread length .562 knurl length and my knurl is .371 from the inside of the head It looks like the picture of your stud I just want to make sure these fit before I order. Mine is black also. I will need 8 studs with lugnuts. If these fit or you have some closer to mine please send me a price including shipping

asked by: David C

Expert Reply:

The Dexter Wheel Bolt # 7-262 that you referenced is indeed extremely close to the measurements on your existing bolt and it should work great as a replacement. This is the closet option we have available.

I did also go out to our warehouse just to take a couple additional measurements that we didn't have listed. I used a digital caliper and found that the knurl is spaced down from the head pretty much by the exact 0.371 inch measurement you took. The thread length is slightly longer though at just under 1-1/4 inches.

expert reply by: Chris R