Replacement For A Northern Breeze Ventline RV Vent Motor

Question

Question:

In search of Northern Breeze by Ventline OEM motor and or brushes

asked by: Fred V

0

Expert Reply:

Unfortunately we do not carry the motor for the Northern Breeze model so I recommend replacing it with the Ventline Ventadome Trailer Roof Vent w/ 12V Fan # V2094SP-34. This roof vent uses a 12-volt fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security.

expert reply by: Kevin C

0

Answer 1

You are correct that the replacement motor was discontinued a number of years ago, and the motor you asked about won't work as they aren't interchangeable parts due to size, current, etc. So the only option really is a new vent, and you can…

view full answer...

Answer 2

Hey Anne, so we don't have any direct replacements for a Northern Breeze V2501 so I'd recommend a complete replacement using the Ventline Ventadome Trailer Roof Vent #V2094SP-34. This roof vent has a 12V reversible fan, is made in the USA,…

view full answer...

Answer 3

It sounds like you likely have an issue with the circuit board. Unfortunately the Northern Breeze fan was discontinued in 2009 and we do not have the replacement parts available anymore. If parts are starting to go bad on your fan, the best solution…

view full answer...

Answer 4

Since the guts of a roof vent aren't really interchangeable between manufacturers and the Northern Breeze line from Ventline is discontinued I recommend replacing your entire vent with the Fan-Tastic Vent Roof Vent w/ 12V Fan #FV801250. This vent…

view full answer...

Answer 5

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 9

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 10

Hello Bruce, Thanks for writing in! Using butyl tape between the trailer body and the Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" #HP96VR is exactly the route I would go. It stays flexible, creates an…

view full answer...

Answer 11

Hello Lee, thanks for reaching out. If air won't go in at all it could be a bad/clogged valve. You could also have a major leak somewhere. Have you tried a soap test to see if there are any leaks?

view full answer...

Answer 12

For your Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter - Lippert 1621 and 0719 - 20,000 lbs #RP94720 you will need the Air System Service Kit for Reese Goose Box 5th Wheel to Gooseneck Air Ride Coupler Adapter #RP86007 which will…

view full answer...

Replacement For A Northern Breeze Ventline RV Vent Motor

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching