See what our Experts say about this Ventline Accessories and Parts

• Deepest Ceiling Garnish for a Ventline E-Z Lift Ventadome Trailer Roof Vent
  The deepest ceiling garnish available for the Ventline E-Z Lift Ventadome Trailer Roof Vent -item # V3092-601-00 is the 5-5/16" item # VA0445-37. None of the other manufacturer's garnishes will fit this vent due to the inside edges being a different shape.
  view full answer...
• Looking For Vent Garnish That Measures 13-1/4" x 13-1/4" x 1-3/4" Deep
  Hello Darrin, thanks for reaching out. The Ceiling Garnish for Ventline Roof Vent # VA0445-37 has an interior dimension of 13-1/4" x 13-1/4". It fits in a standard 14-1/4" x 14-1/4" roof opening. We do not offer anything 1-3/4" deep though, so your best option would be to get a taller garnish and cut it down to size. This garnish will work with most Ventline vents, or really any standard size roof vent assembly.
  view full answer...
• Replacement Plastic for Ceiling Vents
  Hi Kurt; that really depends on who makes the vents and what exactly needs to be replaced. If it is garnish like # VA0445-37 I'm sure it can be replaced. If it is the plastic around the fan where the mesh is at you will need a new vent like # MA00-04401M to replace it.
  view full answer...
• Replacement For Ventline Trailer Roof Vent V2094
  To replace your Ventline V2094 trailer vent fan, use the following: - Ventline Ventadome Trailer Roof Vent w/ 12V Fan # V2094SP-30 This includes a garnish which fits roofs 1-7/8" to 3" thick, but if you have a roof with a different thickness use # VA0445-35 for 2-7/8" to 4" thick roofs, or # VA0445-37 for 5-1/8" to 6-1/4" thick roofs. If you need install materials use Roof Vent Installation Kit # 344270KITW.
  view full answer...
• What Measurement is Needed to Replace Trailer Vent
  Not a saint, but I should still be able to help you out! I believe you are asking about a standard square roof vent on your trailer, and you really just need to know two things - the size of the cut out of the vent opening and the (approximate) depth of the opening. Good news is, square trailer vents are almost always a standard 14-1/4" x 14-1/4" (give or take a smidge), so that's likely what you have, but you'll want to verify. If if is, you can use either a vent without a fan or a vent...
  view full answer...
• Garnish Trim Ring for Trailer Vent Measuring 13 Inches x 13 Inches x 5-3/8 Inches
  The Ceiling Garnish for Ventline Roof Vent part # VA0445-37 is our best match as it measures 5-5/16" tall and the inside opening measures around 13" - 13-1/4 depending on if you include the flange. I am not sure where you are measuring but if you are measuring the inside opening then the above should work well for you. Please note, garnish trim rings are pretty universal so you shouldn't have to much issue and a bit of a gap won't really be a big deal either. If you can provide me with...
  view full answer...
• Replacement Garnish Options for Fan-Tastic Roof Vent 4000
  We have several replacement garnishes for the Fan-Tastic Vent Model 4000 in various colors and lengths: We have the Ceiling Garnish for Fan-Tastic Vents Roof Vent with 6" leg in White, # FVK1060-81. The garnish in black is, # MA10-20209. 4-1/4" leg in white is, # VA0445-28. 4-1/2" leg in off white is, # FVK2040-80. 5" to 5-5/16" in white is, # VA0445-37. 3-1/8" leg in polar white is, # VA0445-35. 4-1/4" in birch white is, # VA0445-28.
  view full answer...
• How to Determine Correct Roof Garnish For Ventline E-Z Lift Ventadome Vent V3094-601-00
  Really good questions, and let's start with securing the Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - White # V3094-601-00. You are correct about the holes, as those are screw holes for the vent; then you'd use butyl tape and sealant to complete the install. You can get the full install kit with the Roof Vent Installation Kit # 344270KITW. As for the ceiling garnish, it is required for the installation of the Ventline E-Z Lift # V3094-601-00. The vent has a...
  view full answer...
  
• How to Choose Correct RV Ceiling Vent Garnish
  Essentially you need to measure the height of the garnish from above the lip to the very top. If you can't find one that fits exactly you can get a garnish that's too large and cut it down to size.
  view full answer...
  
• Availability of Replacement Parts for Ventline Rounded Dome Trailer Roof Vent
  The Ventline product you reviewed, part # V2092SP-28, is a complete vent assembly intended for a rough roof opening of 14-1/4 x 14-1/4 inches. It consists of a wedge-shaped white plastic dome attached to a galvanized steel frame with hand-crank assembly, a removable screen, and a white plastic 2-1/8-inch-deep garnish (interior trim ring). Please note that this part requires an installation kit, part # 344270KITW, which consists of mounting hardware and a urethane caulk sealer. If your...
  view full answer...
  
• Can Heat Cause Yellowing of Roof Vent Garnish and Screen Frame
  Yes, it is possible for yellowing of plastic to occur in high heat. Florida tends to do a great job of that in the summer. Since it doesn't look like anything is cracked I would say go ahead and throw some Krylon Fusion on there. When they start to wear out more or if they start to crack you can go ahead and swap them out. Based on what you got last time you will need the following when it comes time to replace them: -Replacement Screen Frame with Screen, Rocker Switch, and Wire for Ventline...
  view full answer...
  
• Vent to Replace 13 x 13 Roof Vent
  Vents now are a standard 14" x 14" so there are no covers we can offer which will work with a 13" x 13" roof vent. I highly recommend enlarging your vent opening and switching to the standard 14" x 14" size to meet the size of today's vents in order to more easily - and less expensively - obtain replacement parts or a replacement at some point. For that, a budget-friendly option is the Ventline Ventadome Trailer Roof Vent # V2092SP-28. For installation you will need the Roof Vent Installation...
  view full answer...
• Looking for Replacement Screen/Frame as Well As Garnish for Ventline VD0434
  Hey Duane, for the replacement screen and frame for the Ventline roof vent you found with the part number VD0434 we have the # BVC0573-31 in birch white or # BVC0573-41 in polar white. Here are the different height garnishes we offer as well. Leg depth Polar White Birch White 1-1/8" # VA0445-33 # VA0445-25 2-1/8" # VA0445-34 # VA0445-26 3-1/8" # VA0445-35 # VA0445-27 5-1/8" # VA0445-37 # VA0445-29
  view full answer...
• Vent Cover Interior Trim Pieces For A Ventline Ventadome
  Yes, we have a few sizes for your Ventline Ventadome Trailer Roof Vent # V2092SP-25 depending on your needs: Ceiling Garnish for Ventline Roof Vent - 2-1/8" Leg # VA0445-26. Ceiling Garnish for Ventline Roof Vent - 3-1/8" Leg # VA0445-27. Ceiling Garnish for Ventline Roof Vent - 4-1/8" Leg # VA0445-36. Ceiling Garnish for Ventline Roof Vent - 4-1/4" Leg # VA0445-28. Ceiling Garnish for Ventline Roof Vent - 5-1/8" Leg # VA0445-29. Ceiling Garnish for Ventline Roof Vent - 5-5/16" Leg...
  view full answer...
• Roof Vent Recommendation for RV with 4 inch Thick Opening
  What you'd want is a roof vent like the Ventline # V2092SP-28 with a taller ceiling garnish part # VA0445-37 which is 5-5/16 inches tall and can be trimmed down to a shorter length appropriate for your ceiling opening.
  view full answer...
• Replacement for 4000T Fan-Tastic Vent RV Roof Vent
  The parts you mentioned are not available as replacement parts so the best we can offer will be a new 12 volt fan with a manual lift. What you can use in its place is the Ventline Ventadome Trailer Roof Vent with 12V Fan - Manual Lift # V2094SP-30. This vent comes will fit roofs that are between 1" and 3" thick, or if your roof is up to 4" thick you can add the Ceiling Garnish # VA0445-35; for a roof from 4-7/8" to 6" thick you would need the Ceiling Garnish # VA0445-37. I have added...
  view full answer...
• Ceiling Garnish For a Dometic Fantastic Roof Vent Fan Model 1450
  You will need the Ceiling Garnish for Fan-Tastic Vents Roof Vent # FVK1060-81 as it is specific to your Dometic Fantastic Fan 1450. The Ceiling Garnish for Ventline Roof Vent # VA0445-37 is going to have rounded corners as opposed to the square on the Fantastic Fan Vent so it will not fit properly.
  view full answer...
• Ventline Ceiling Garnish # VA0445-37 Dimensions
  I measured the Ventline Ceiling Garnish # VA0445-37 for you. I found the garnish to measure 15-7/8 inches x 15-7/8 inches overall. On the underside, the trim measures 1-3/16 inches wide. The inside dimensions are 13-1/8 on the end farthest from the flange and 13-3/8 inches on the end with the flange as you can see the slight step in the photo.
  view full answer...
  
• Taller Garnish Recommendation for Camco Roof Vent part # CAM40480
  What you need is a taller garnish for installing the Camco Roof Vent part # CAM40480 that you referenced. For that you'd want the part # VA0445-35 which is 3-1/8 inches tall. Or for an even taller garnish we have the part # VA0445-37 which is designed for the height range of 4-7/8 to 6-1/4 inches.
  view full answer...
• Replacement Ceiling Garnish For Ventline Roof On Jayco Eagle Travel Trailer
  The Ceiling Garnish for Ventline Roof Vent White # VA0445-37 has 5-5/16" legs and the Ceiling Garnish for Ventline Roof Vent Birch White # VA0445-29 has 5-1/8" legs. It sounds like you need the 5-5/16" legs, however, this is not available in birch white, just polar white. Both parts have dimensions of 16" by 16". If your current vent garnish is also 16" by 16" then it sounds like the # VA0445-37 would work for you.
  view full answer...
• Looking for 6 Inch Vent Fan Garnish
  The ceiling garnish with the largest leg that we offer is the Ventline Ceiling Garnish # VA0445-37 in polar white or # VA0445-29 in birch white. This garnish has a leg the measures 5-1/8 inches and is designed to fit 14 inch x 14 inch Ventline roof vent fans. Depending on the Ventline fan model, the garnish will fit roofs up to 6 or 6-1/4 inches thick. For Ventline models V2092, V2094, and V2110, the # VA0445-37 garnish will fit roofs 4-7/8 inches - 6 inches thick. With model V2119, the...
  view full answer...
  
• Replacement Polar White Ceiling Garnish for Ventline Roof Vents
  Hey JD. The Ceiling Garnish for Ventline Roof Vent item # VA0445-36 has interior measurements of 13" long x 13" wide. It has a 4-1/8" tall leg and designed to fit roofs between 3-7/8" to 5-1/4" thick. This garnish can be trimmed to accommodate a thinner ceiling. The Ceiling Garnish item # VA0445-36 is designed to replace the ones that come with Ventline Roof Vents models V2092, V2094, V2110 and V2119. We have other sized options that I have listed below along with their interior measurements: 1-7/8"...
  view full answer...
• Replacement Cover for Ventline Fan in 2000 Dutchman Lite
  We do have domes that are smoke colored with a continuous hinge, though they measure 14" x 14", the Ventline Replacement Vents # BVD0449-A03 and # BV0554-03. The best thing for you to do would be to turn your 13-1/2" x 13-1/2" hole into a 14-1/4" x 14-1/4" opening and replace your vents with new ones. A great choice would be the Ventline E-Z Lift # V3092-603-00 You'd need a garnish that depends on the length of your ceiling, either 2-1/8" # VA0445-34, 3-1/8" # VA0445-35 or 5-1/8" # VA0445-37. We...
  view full answer...
• Replacement Screen for the Ventadome Model 2128
  Great news, I was able to find the Birch White screen base # BVA0444-32 you were looking for. The Polar White is # BVA0444-42. This will fit the Ventline Ventadome roof vent model V2128.
  view full answer...

Do you have a question about this Accessories and Part?