How to Install Curt 56420 Trailer Wiring Harness on 2022 Hyundai Tucson
Published 08/18/2021
Question:
How do I install hitch wiring which panels need to be removed on bottom of car I have connector already
asked by: Brad B
Helpful Expert Reply:
According to the linked installation instructions, the shroud located just rearward of the driver's side rear wheel needs to be temporarily removed to access the factory tow package wiring connector. I've provided a photo showing the panel in question. The panel is held in place with 3 push fasteners and 2 14mm bolts. You'll see the factory connector, simply remove the protective cover and plug in the # CU94FR.
The 4 pole connector would then be routed over to the hitch receiver, and the dust cover for the connector can be used to clip the connector to one of the safety chain loops, as shown in the linked video. Or, you can use a bracket that would attach to the underside of the hitch crossbar that would consist of parts # 18140 and # 18144.
I've linked to an install vide that you might find helpful. The video shows the # CU94FR connector being installed on a Palisade, but the procedure would be the same on the Tucson.
(click to enlarge)
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Hidden
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Search Results: bracket
- Shop: Curt Mounting Bracket for 7-Way Connector Plug
- Shop: Trailer Hitch
- Q&A: 7-Pin Wiring Harness And Brake Controller For A 2024 Hyundai Santa Cruz
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Curt No-Drill Bracket for 4-, 5-, or 6-Way Trailer Connector Mounting Brackets - Short
- Shop: Curt No-Drill Bracket for 6-Way or 7-Way Round Trailer Connector Mounting Bracket - Long
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
- Search Results: 57204
- Search Results: 57240
- Search Results: adapter
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch
- Video: How to Install the TowSmart Class III Trailer Hitch - 2024 Kia Sportage
- Video: Installing the Curt Powered Tail Light Converter Trailer Connector on a 2025 Kia Sportage
- Search Results: curt 56420
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Video: Mounting Bracket 4-Pole Flat: The Breakdown
- Video: Curt Powered Tail Light Converter Installation - 2023 Kia Telluride
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Video: Installing the Towsmart Trailer Hitch Receiver on a 2025 Kia Sportage
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer hitch
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer wiring
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Suspension Enhancement
on Custom Fit Vehicle Wiring
