Can You Backup and Make Tight Turns With Equal-i-zer Weight Distribution Hitch EQ37060ET Installed?
Updated 08/17/2021 | Published 08/16/2021 >
Question:
Can this be used when driving around the city..i.e. tight turns, backing up and such? Or does it need to be removed and a traditional ball mount have to be used?
asked by: Steven B
Expert Reply:
The Equal-i-zer Weight Distribution Hitch # EQ37060ET you were looking at allows backing up while it is still attached along with tight turns, so this hitch will work perfectly for city driving.
To make sure this is the correct hitch for you, you will need to confirm your total tongue weight.
Total tongue weight is the tongue weight of your fully loaded trailer plus the weight of any cargo behind the rear axle of your tow vehicle. The easiest way to get an accurate tongue weight measurement is with a tongue weight scale like the # e99044 but there are other methods outlined in the included help article.
The # e99044 works with total tongue weights between 200-600lbs, so as long as that matches your measurement this is a perfect option for you.
If your total tongue weight is outside of this range just let me know and I would be happy to make a different recommendation for you.
I included a video of the # EQ37060ET for you to take a look at.
Product Page this Question was Asked From
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Trunnion Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- Top-Mount
- Fits 2 Inch Hitch
- Allows Backing Up
- 400 lbs
- 500 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Why Do The Sway Bracket Jackets For Equal-i-zer Weight Distribution Affect Sway Control Feature
- Search Results: mirror extender
- Q&A: Can a Trailer with an Equalizer Weight Distribution System Be Backed Up with Spring Bars Installed
- Video: Let’s Check Out the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control
- Video: Customer Review - Equal-i-zer Weight Distribution System
- Video: Mount: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control on a 2019 Ford F-150
- Shop: Towing Mirrors
- Shop: RV Antenna and Radio
- Shop: Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side
- Shop: CIPA Custom Towing Mirrors - Slip On - Driver Side and Passenger Side
- Shop: Replacement L-Bracket for Equal-i-zer 6,000-lb to 14,000-lb Weight Distribution Systems - Qty 1
- Shop: K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW
- Shop: Sway Bracket Jackets for Equal-i-zer Weight Distribution Systems - Qty 2
- Shop: Camco RV Refrigerator Double Bar - White
- Q&A: Availability of 2-5/16" Ball for Andersen Weight Distribution Hitch
- Q&A: Should I Run the Spacer with the Timbren for 2025 Toyota Tundra
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Weight Distribution Recommendation for 2026 Jayco Feather 19MRK
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Will The Curt TruTrack 2P Weight Distribution System C69JR Work With 2026 Jayco FLIGHT SLX 170BH?
- Q&A: Comparison of Fastway and Equal-i-zer Weight Distribution Systems for 3,000 Pound Trailer
- Article: How to Measure for Trailer Hitch Drop
- Article: Determining Trailer Tongue Weight
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Top Weight Distribution Hitches for a Buttery Smooth Ride




