Replacement Landing Gear For 2011 Keystone Montana

Question

Question:

I own a 2011 Keystone Montana 290RL T11. What would be the correct landing gear for this model?

asked by: Gary

0

Expert Reply:

The Keystone Montana is unique in that it has its own set of landing gear legs with three weld stops (tabs) instead of two, and the only option we offer for that is a set of replacement legs:

- Replacement Lead Leg for Keystone Montana 5th Wheel Landing Gear # LC178653

- Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear # LC178652

If you use the bottom-most weld stop (tab) you would have to go with these, however, the distance between the top weld stop and second-to-bottom is standard, so if you use that you can replace it with standard landing gear, the Lippert Electric Landing Gear Set # LC333964.

I have added links below to video reviews foryou to check out as well if you'd like to take a look.

expert reply by: Kyle S

0

Answer 1

Lippert made specific replacement landing gear for your 2011 Keystone Montana 5th Wheel. Replacement Lead Leg for Keystone Montana 5th Wheel Landing Gear #LC178653 and Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear #LC178652.

view full answer...

Answer 2

In order to determine if the issue you are having with your landing gear legs clicking and popping is caused by the gear box or leg assembly you will simply need to disconnect the gear box from the legs and then test each manually. If you feel…

view full answer...

Answer 3

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 4

For your 2008 Keystone Montana Mountaneer 345DBQ, the Lippert Replacement Lead Leg for Keystone Montana 5th Wheel Landing Gear #LC178653 and follow leg #LC178652 are a perfect replacement. These parts are exactly what you need for your trailer. If…

view full answer...

Answer 5

Hi Shaun, I can definitely help with that. From what we typically see on the 2020 Forest River Wolfpack 365PACK16, the most common landing gear setup is the Lippert/Venture style system with 33-1/2 inch outer tubes and 15-1/2 inch inside-to-inside…

view full answer...

Answer 6

Hey Frank, since Atwood is no longer in business we can't get replacement legs for their setups which means your best option is to replace everything like with the Lippert #LG-4 that you referenced. We do know that the Lippert kits do fit the…

view full answer...

Answer 7

Your Raptor Toy Hauler likely has a landing gear setup similar to the one you were looking at: Lippert Electric Landing Gear Set - Weld On - 37" Lift - 6,000 lbs #LC333964. If so, then the correct replacement motor would be Lippert Components…

view full answer...

Answer 8

Technically any landing gear will fit your 5th wheel, but the real key is to find one with matching weld stops so that you don't have to cut the brackets off and weld on new ones. The Stromberg Carlson Electric Landing Gear Set #LG-4 has a…

view full answer...

Answer 9

Hi James; the better option would be the Bulldog #BD500162 you were looking at. You can add the Motor and Switch Kit for Stromberg Carlson Landing Gear #LG-217884 to the Bulldog which will give it the same functionality as the #LG-4 while saving you…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

We can get you un-stranded! The correct follow leg for your landing gear is going to depend on how long it is. If your leg measures 29-1/2" (see attached photo), you would need replacement #LG-179014, which can be used with most landing gear…

view full answer...

Replacement Landing Gear For 2011 Keystone Montana

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching