Mounting Hole Width Of Curt Trailer Hitch Receiver For a 1997 Dodge B3500 Van

Question

Question:

Just took my 1997 Dodge B3500 Extended Body cargo van to a shop here in Phoenix and they said the receiver they got would not fit my van 4inch short in width and he could not find one that did. Do you have a receiver that will fit and can you supply me with the dimensions? I cant seem to find that information. Thank You

asked by: David J

0

Expert Reply:

Our Curt Trailer Hitch Receiver # C13041 and # 13590 that are designed to fit your 1997 Dodge B3500 Van both have a width of 40" from the bolt hole center to bolt hole center.

The Curt # C13041 is to be used with a standard bumper while the Curt # 13590 is for vans with a factory step bumper.

expert reply by: Bud M

0

Mounting Hole Width Curt Trailer Hitch Receiver # 13590
(click to enlarge)

Answer 1

For your 1997 Dodge Ram 1500 van we have the Curt hitch part #C13041 as a confirmed fit but the #13590 is not what you would need. The cut out in the side of the mounting bracket is designed to fit around your gas tank feed line.

view full answer...

Answer 2

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 3

Hello Kenzie, thanks for reaching out. We do offer a custom fit hitch for the 1995 Dodge 2500 Van. Take a look at the following: - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13041 This will fit full size van models with the…

view full answer...

Answer 4

There are three hitches that fit the full-size 1987 Dodge Van with a standard bumper. These are parts #75140, #87492 and #C13041. The hitches that fit the 1995 Dodge Van (again the full-size with standard bumper) include three shared parts, #75140,…

view full answer...

Answer 5

The Zephyr conversion didn't do anything to change the rear bumper and frame area of your 1992 Ram 250 van, so a standard hitch would work great for you. I'd recommend the Curt Class III Receiver Hitch #C13041. The hitch has a 6000 lb…

view full answer...

Answer 6

If your 1991 Dodge Ram did not come with trailer wiring, you will first need to install a 4-Way wiring harness #18252. You will need to use the included circuit tester to test the vehicle tail light wiring. The tail light wire with left turn signal…

view full answer...

Answer 7

For your 2018 Lexus RX350L the wiring harness #118255 is not a fit. You will use the harness #118252 if you have the factory tow package. This harness will be near the hitch on the driver's side of the vehicle and this harness has a protective…

view full answer...

Answer 8

I recommend checking out the Curt Trailer Hitch Receiver #C13041 for your 1997 Dodge Van with the regular bumper. This is a Class III hitch with a 2" receiver rated for 600 lbs tongue and 6,000 lbs towing so it will be prefect for basically any…

view full answer...

Answer 9

Curt trailer hitch #13590 is designed to fit 1997 to 2003 full size Dodge vans with the factory step bumper. Your 1-ton van is a full size model so as long as it has the factory step bumper the hitch will fit. If it has the standard bumper and not a…

view full answer...