Replacement Hub and Drums For PJT Trailer With 008-393-03 Installed

Question

Question:

I HAVE A PJT TRAILER I NEED 3 HUBDRUMS FOR- THE BRAKE SHOES HAVE A TAG ON THEM - 23-428 AND 23-429. THE DRUM HAD A TAG 008-393-03 IS THIS THE SAME AS YOUR 8-393-4UC3?

asked by: RICK K

1

Helpful Expert Reply:

Thanks for all of the information on your PJT Trailer!

Based on your drum part number you have a 12-1/4" Drum that is oil bath. The Dexter # 8-393-4UC3 is almost right, but it is designed for grease and not oil.

You will need the # 8-393-4UC3 and oil seal # 10-63 for each hub. This hub does not include the bearings so you will also need new inner bearing # 25580 and outer bearing # 02475 for each hub.

If you need replacement brakes now or in the future you will need # 23-428-429 for each axle.

I included a few video reviews for you to take a look at.

expert reply by: Samuel C

1

Answer 1

For your 2021 GMC Sierra 1500 with a 5-1/2 foot bed that is CarbonPro we have the BAK Revolver X4S part #BAK34ZR which is a hard roll up style cover. We also have the following: #TX79FR #BAK52FR #TX36FR #A25VR #A65FR #A75FR #A33ZJ #LOM76FR #A82VR…

view full answer...

Answer 2

We currently offer 3 different replacement strap hinges, #2008-8, #2512, and #2212, for cargo trailers. I have included a photo showing each of these with their measurements listed. I recommend comparing these measurements to the strap hinges on your…

view full answer...

Answer 3

Hello Jeff, I sure can! There are two key pieces of info we will need in order to know exactly what spring you will need. The weight capacity of your axle, and the unloaded eye-to-eye length of the current spring. Try jacking up one side of the…

view full answer...

Answer 4

We have several options for replacement 84 Series Bargman lights like what you have. If you have a two panel light we have the part #30-84-527 or if you have a three panel part #30-84-509.

view full answer...

Answer 5

From what I was able to determine from my research, the 023-326-00 brakes are 12" brakes from Dexter and were designed for trailer axles with between 5200 and 7000-lbs capacity. I don't believe that I've ever seen a brake mounting flange…

view full answer...

Answer 6

I attached a picture that has about every dimension you could want for the part #BD500217. The overall length is 17 inches and the diameter of the screw is 1-1/4 inches.

view full answer...

Answer 7

I spoke to my contact at Horizon Global. He said it is acceptable to mount the Bulldog Powered-Drive Kit #BD1824200100 to the slave jack itself. He also said that if you need to switch the motor wires to make it work correctly, that would be fine, as…

view full answer...

Replacement Hub and Drums For PJT Trailer With 008-393-03 Installed

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching