Correct Replacement Gearbox for Landing Gear Motor 1RV-200

Question

Question:

I need a gearbox and I can’t find any part number on the gearbox itself. The gearbox is attached to a ADTH brand 12v motor. Part # 1RV-200. Can you recommend a gearbox.

asked by: Donald C

0

Expert Reply:

The correct replacement for the Landing Gear Motor 1RV-200 is the Lippert Venture 5th Wheel RV Landing Gear Motor part # LC142178. The correct replacement gearbox for this motor is the Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies part # LC276602.

expert reply by: Conner L

0

Answer 1

From what I could find it looks like your ADTH 1RV-200 motor has a weight capacity of 6,500 lbs. You can use a motor that is rated for a higher capacity, like our replacement motor #LC142178 for Ram landing gear which is rated at 8,000 lbs. Just keep…

view full answer...

Answer 2

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

Hi Eric, Thanks for your question. As long as you are able to remove the factory hitch from your 2025 GMC Sierra 2500, the #C96CR will work as a replacement. Of note, the #C96CR will more than likely mount up a bit differently than your factory…

view full answer...

Answer 8

Hi Dennis! The Hellwig Load Pro 35 Heavy Duty Helper Springs with Custom Mounting Kit - Above Axle #HE93XR can potentially raise an unloaded truck a little, but it's going to be very minimal and will really only happen if your suspension is…

view full answer...

Answer 9

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 10

Hey Aaron, thanks for reaching out. Based on the specs I found online, the Americana Modular Wheel #AM92NR shares the same dimensions as your SRW 31767A9 trailer wheel. It has the same 17.5" x 6.75" size with 8 on 6.5" bolt pattern and…

view full answer...

Answer 11

Hey Kevin, yes we have the SumoSprings kit part #SS46KJ that is a fit for your 2025 Chevrolet Silverado 2500 HD. This is the medium density foam spring provides 2,800-lb support capacity at 50% compression and also requires no drilling for install!…

view full answer...

Answer 12

Hello Desiree, thanks for reaching out. We have just the thing! For your 2023 Chevy 2500 High Country Diesel I recommend the following: - Firestone Ride-Rite Air Bags w/ Easy Mount Compressor - Wireless Control - Single Path - 5,000 lbs #F64XV This…

view full answer...

Correct Replacement Gearbox for Landing Gear Motor 1RV-200

Products Featured in This Question

Continue Researching