Replacing ADTH 1RV-200 Landing Gear Motor

Updated 07/27/2020 | Published 04/13/2018

Question:

I have an ADTH 1RV-200 motor and I would like to replace it with a higher lbs capacity . Is there a replacement motor available that will fit and what would be the capacity. Application: 2006 38 Keystone Raptor. Thanks

asked by: Vaughn

Expert Reply:

From what I could find it looks like your ADTH 1RV-200 motor has a weight capacity of 6,500 lbs.

You can use a motor that is rated for a higher capacity, like our replacement motor # LC142178 for Ram landing gear which is rated at 8,000 lbs. Just keep in mind that just because the motor is rated for a higher capacity it doesn't raise the capacity of your landing gear. Please note that the mounting hole spacing is 4" on center for this motor.

For a similar motor, I recommend going with the Lippert Replacement Motor for Stromberg Carlson Electric Landing Gear Set # LG-196308. This is also rated for 6,500 lbs and has a mounting hole spacing that is 4-1/8" on center.

expert reply by: Jon G

Jerry

3/26/2020

I have a 2009 raptor 3812 which replacement motor would you recommend?

Chris R.

3/26/2020

Can you tell me if there's a model number printed anywhere on the existing motor or gearbox? Unfortunately I'm not able to track down the right motor just based on the trailer model. Trailer manufacturer's aren't the best at making this kind of info available.