Replacement Bearings, Races and Grease Seals For A 2002 Karavan Boat Trailer
Updated 07/01/2021 | Published 06/30/2021
Products Featured in This Question
Question:
I am looking at the BK1-150 kit for both sides of my roughly 2002 karavan pwc trailer. When I measured the axle it looks like it takes a 34823 RG06-010 seal instead of the seal in this kit. Is it possible to swap out the 2 seals in this kit for the RG06-010 seal kit or do you have to just buy them both separately and waste the seals that are not needed. I went through all of the bearing kits I could find on the site and it did not seem like there was one with the L44649 bearings for inner and outer with the correct size seal.
asked by: Corey R
Expert Reply:
The Bearing Kit # BK1-150 contains the bearings, races and grease seal commonly found on a BTR Spindle.
The Bearing Kit # BK1-100 contains the bearings, races and grease seal commonly found on a BT8 Spindle.
It appears that your spindle on your 2002 Karavan PWC Trailer uses a combination of the two kits. As we do not have an exact kit with the components that you need you can acquire all the parts individually. You will need the following parts for both hubs on your axle.
4- # L44649 Bearings
4- # L44610 Races
2- # 34823 Grease Seals
And if you have a EZ lube spindle 2- Spindle Washers # 5-101, or 2- Cotter Pins # 165649 for a standard castle nut spindle.
Product Page this Question was Asked From
Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing L44649
- Race L44610
- 1000 lbs Axle
- 2000 lbs Axle
- 2200 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Where to Find VIN/Serial Number on Boat Trailer
- Search Results: karavan trailer parts
- Search Results: 34823
- Search Results: grease
- Shop: Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: Grease Cap - 1.988" Outer Diameter - Drive In
- Shop: Replacement Race for L44643 and L44649 Bearings
- Shop: Replacement Trailer Hub Bearing - L44643
- Shop: Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Shop: Bearing Kit with Grease Cap for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Shop: Replacement Trailer Hub Bearing - L44649
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Hubs/Bearings for 2000 Kendon Folding Trailer With 1-1/16 Inch Diameter Spindle
- Q&A: Replacement Bearing Kit for Detail K2 Mighty Multi A-Frame Utility Trailer
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Do You Have a Gooseneck Hitch for a 2021 Chevy Silverado 5500?
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)