bing tracking image

etrailer Trailer Bearings Races Seals Caps - Races - L44610 Review

content loading

Customers compare L44610 to these similar products




Products Featured in this Video



Review of etrailer Trailer Bearings and Races L44610


Today we're gonna take a look at the replacement bearing race for the L44643 bearing and the L44649 bearing. This race will provide the smooth surface for the bearing to roll on inside of your trailer hub. Typically if you have to get new bearings it is a good idea to also replace the races along with the bearings. The races do have to be pressed into the trailer hub. The replacement part does use industry standard numbers. The part number on this race is L44610 and again, the matching bearings that we do sell separately are the L44643 and L44649.

I did happen to pull one of each. Here's the L44643. You can see it's designed to go right into the bearing race and here's the L44649. It also fits right in there. Now the main measurement on your bearing race is the outer diameter which is measured edge to edge just like this. It's measured in thousandth so what I'm gonna do is use a digital caliper just to show you the measurement and probably try to zoom in to get you...but you can see as we...I'll zoom in just a little bit and you'll be able to see the measurement on the outer diameter is 1.980.

That should do it for your review of the replacement bearing race for the L44643 bearing and the L44649 bearing.


Questions and Comments about this Video

Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Randy B
Installed by:
Randy B
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.