Where Do You Drill 4" Hole For B&W Turnoverball BWGNRK1104 In 2013 Ford F-150 W/ 5-1/2' Bed?

Updated 06/24/2021 | Published 06/23/2021

Question:

I have a 2013 ford f150 short bed. The bed i 57inch long measuring when the tail gate is down from the front to the back end of the bed. To cut the hole in the be is the measurement the same for the hole. I have no clue if all short bed fords have the same measurements as my ford. will the bwgnrk1104 Gooseneck fit my truck using the 45 1/8 measurement. thanks for your time and effort.

asked by: James B

Expert Reply:

To install the B&W Turnoverball Gooseneck Hitch # BWGNRK1104 you were looking at in your 2013 Ford F-150 with the 5-1/2' Bed you will need to measure from the end of the bed where the tail gate ends forward 45-1/8" as you mentioned. This will be the location you will need to drill the 4" diameter hole for the gooseneck hitch.

All of the F-150's no matter the bed size will use the same measurement.

I included a video review of the # BWGNRK1104 for you to take a look at.

expert reply by: Samuel C