Determining Correct Bearing Buddies For Mastertow Tow Dolly
Updated 06/08/2021 | Published 06/06/2021 >
Products Featured in This Question
Question:
Can I use Bearing Buddies on my Master Tow tow dolly? If so — What size would you recommend? Thanks
asked by: David
Expert Reply:
Yes, you can install Bearing Buddies on your Mastertow Tow Dolly, but unfortunately I was unable to find the specifications on the hub it uses to find exactly which one will fit.
You will need to use digital calipers like # PTW2993 to measure the hub bore as shown in the included diagram.
If you find your hub bore is 2.328" in diameter then the Bearing Buddy Bearing Protectors - Model 2328SS - Stainless Steel (Pair) # BB2328SS you were looking at will fit perfectly. If you find your hub bore is a different diameter just let me know.
I included a video of the # BB2328SS for you to take a look at.
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 2328SS - Stainless Steel - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.33 Inch
- 4400 lbs Axle
- 5200 lbs Axle
- 6000 lbs Axle
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Wiring a Tow Vehicle to Tow a Dinghy
- Article: 5 Things to Know About Weight Distribution Hitches
- Shop: Vehicle Tow Bar Wiring
- Shop: Trailer Wiring
- Shop: Vehicle Tow Bar Brake System
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Roadmaster InvisiBrake Flat Tow Brake System - Preset
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: An In-Depth Look at the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Search Results: trailer hitch
- Search Results: trailer wiring
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Video: An In-Depth Look at the Roadmaster Battery Charge Line Kit for Towed Vehicles
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Measure for Trailer Hitch Drop
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer tires and wheels
- Shop: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord
- Shop: Suspension Enhancement
- Search Results: trailer jack
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Base Plate for Tow Bar
- Shop: Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional
- Q&A: How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Shop: Brake Controller



