Parts Needed to Install the Curt # C13382 on a 2018 Subaru Crosstrek

Updated 06/01/2021 | Published 05/28/2021

Question:

Is there a specific sized torque wrench needed to install? I know it should be 110lb and the sockets are 3/4 inch socket. But not sure if I need a specific size torque wrench 1/4 , 3/8, 1/2, 3/4. Thanks!

asked by: David

Expert Reply:

To get the Curt # C13382 installed on your 2018 Subaru Crosstrek, the important part is the 3/4" socket. With the nuts needing to be torqued to 110 foot pounds, I will recommend going with a 1/2 or 3/4 drive, however.

expert reply by: Lazer S