Bolt Hole Spacing of Curt C13402 Class III Receiver Hitch
Updated 05/28/2021 | Published 05/27/2021
Question:
Do you have information on the bolt pattern for the Curt 13402 hitch receiver? What I need to know is the center-to-center distance between the holes on the 2 wings. From side to side and between holes on a given side. Thanks
asked by: Troy L
Expert Reply:
The side to side, center to center bolt hole spacing is 39.38 inches for all three rows of holes. From the rear working forward, the center of the first hole is 2.6 inches apart from the center of the second hole. The second hole is 4.26 inches apart from the third hole.
I've provided a photo showing these dimensions.
(click to enlarge)
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 600 lbs TW
- 6000 lbs GTW
- 10000 lbs WD GTW
- 2 Inch Hitch
- 1000 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: How to Remove The Oris Detachable Hitch Receiver
- Q&A: Does the Oris AK41 Hitch Block the Foot Sensor on a 2021 Volvo XC90?
- Q&A: Recommended Hitch for a 2024 Volvo XC60 Recharge
- Q&A: Hitch and Cargo Carrier for 2019 Volvo XC60 to Carry Rollator
- Q&A: Trailer Hitch for 2019 Volvo XC60
- Q&A: Installing Hitch When Holes Do Not Line Up
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Bolt Size and Thread Pitch of Attachment Hardware for Draw-Tite Class III Hitch # 75471
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size