Installing The Roadmaster Braking Monitor Using The Brake Controller Port 2020 Fleetwood Pace Arrow

Updated 05/25/2021 | Published 05/21/2021

Products Featured in This Question

Second Motorhome Braking Monitor/Alarm Kit for Roadmaster InvisiBrake Systems

(52)

$109.50

Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers

(73)

$26.82

Brake Buddy Select 3 Portable Flat Tow Brake System - Proportional

(314)

$1488.91

Roadmaster InvisiBrake Flat Tow Brake System - Preset

(284)

$1380.00

Question:

Can you tell me where the brake controller port is on my 2020 Fleetwood Pace Arrow and what connector will work with it? I want to use the brake output wire to wire my motorhome monitor light rather than running wire all the way to the back of the coach.

asked by: Shane

Expert Reply:

There isn't a guide out there that will tell us where the port is located but it generally is right under the dash near the steering column. I've attached a picture of a 2017 Pace Arrow where we were provided with a picture of where it was located to help you.

The Brake Buddy Select 3 Portable Supplemental Braking System - Proportional Item # HM39524 I recommended for flat towing your Jeep is a wireless system so it wouldn't communicate with the Roadmaster 2nd Motorhome Monitor/Alarm Kit Item # RM-98850 and you would need to instead use the Roadmaster InvisiBrake Supplemental Braking System Item # RM-8700, which will come with the light included.

The video I have attached shows how to install the light if your RV doesn't have a trailer brake controller installed but is wired for one. If you do have a trailer brake controller installed then you'll need the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers Item # 3027-P.

expert reply by: Kevin C