How to Pick Out Replacement Hub for Shoreland'r Trailer
Updated 05/12/2021 | Published 05/11/2021
Question:
Im looking for a pregreased wheel hub kit for a Shorelander boat trailer Model # LUV28BXXL S/N 1MDAJAU17CA479500 with surge brakes so it does need a vented hub. Do you sell anything like that or can I order the individual parts from you? Thank you.
asked by: Karry K
Expert Reply:
What is the axle capacity and bolt pattern of the hub of your trailer? With that info I can pick you out the correct parts but without that I don't have a way to look up what you need with just the trailer model number.
Otherwise in order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: db~42
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: DeeMaxx 10" Hub/Rotor Assembly - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Q&A: Replacement Hubs and Brake Actuator for 2018 ShorLand'r Boat Trailer
- Q&A: Replacement Axle, Hubs, and Brakes for a ShorLandr Dual Axle Trailer
- Video: Installing the etrailer Easy Grease Trailer Idler Hub Assembly
- Video: All You Need to Know About the DeeMaxx 10" Hub/Rotor Assembly
- Shop: Dexter 9-3/4" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 4,200 lbs
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Replacement Trailer Hub Bearing - L68149
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: In-Depth Review of the Replacement DeeMaxx Disc Brake Caliper
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: trailer wiring
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Video: Fifth Wheel Towing Made Simple with Daniel
- Search Results: trailer jack
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Shop: Brake Controller
on Trailer Hubs and Drums
