Steering Stabilizer for a 1999 Ford E-450 Class C Motor Home

Question

Question:

whats the right steering stabilizer for our 1999 E450 class C motorhome?

asked by: Jessie S

0

Expert Reply:

For your 1999 Ford E-450 Class C motorhome use # RM47MR.

expert reply by: Michael H

0

Albert S.

5/19/2020

i have a class c motor home 1999 ford E-450 with a v-10 engine what steering stabilizer do i need

Chris R.

5/21/2020

For the V10 engine you'll need the Roadmaster Steering Stabilizer # RM-RBK24-RSSC.

Answer 1

For your Forest River Sun Seeker 3010DS Class C motorhome on a 2012 Ford E-450 van cutaway chassis, you'll need to go with the Roadmaster #RM-RBK24-RSSC. If you click the provided link, you can see an install video that you might find helpful.

view full answer...

Answer 2

Generally, the cutaway chassis used will be a model year behind that of the motorhome, so your new RV would be a 2017 on a 2016 Ford E450 cutaway van chassis. If your Roadmaster Reflex Steering Stabilizer is the RSSC and the bracket kit was the RBK24…

view full answer...

Answer 3

Hello Paul, thanks for reaching out. We do indeed offer steering stabilizers for your 2006 Tioga Ford E450 Class C motorhome. Here are the options we offer: - Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR - Roadmaster Reflex…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

view full answer...

Answer 6

Hey Joel, we do have Roadmaster sway bars that fit the front and rear of your 2017 E-450 Class C Minnie Winnie with the part #RM-1139-189 for the front bar or part #RM-1139-147 for the rear. Hows the handling currently?

view full answer...

Answer 7

Got ya Mark, thanks for reaching out! The Roadmaster Reflex Steering Stabilizer for Class A Motorhomes is the correct part for the Horizon but there two parts, the steering stabilizer itself #RM-RSSA and a vehicle specific mounting bracket kit. So…

view full answer...

Answer 8

Hi Uwe! Yes, the SnapPad StakPad Universal Leveling Block and Jack Pad #SN24VR can hold that weight. These have a capacity of 40,000 lbs, so as absurd as it may seem a single jack pad can handle the entire weight of your Class A. Using these under…

view full answer...

Answer 9

Good question, Rick. The #ST28MR blue and #ST88MR white steering stabilizer are tuned for different F-53 weight ranges. The blue version is for 24,000 lb + GVWR, while the white one fits 16,000–22,000 lb chassis. What’s your coach’s GVWR or model…

view full answer...

Answer 10

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 11

Ben, both aim to keep your steering centered, but the #ST98MR uses a sealed hydraulic piston with a calibrated spring instead of external coils. That gives you smoother centering and better control when the road surface changes. It’s also fully…

view full answer...

Steering Stabilizer for a 1999 Ford E-450 Class C Motor Home

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching