Parts Needed to Flat Tow a 2006 Honda Accord Behind a Motor Home
Updated 03/22/2013 | Published 03/20/2013
Products Featured in This Question
Question:
I am installing a tow bar on my car last time I had to install a diod to get the motoer home taillights to work on the towed car I know this is ment for a trialer lights but if power was put to the plug would it work in reverse for the tail and stop lights while being towed
asked by: Sam
Expert Reply:
Regular trailer wiring harnesses will not work in reverse. they are designed to fail if that is done to protect the vehicle wiring from damage if there were a short circuit on the trailer. You will need a kit specifically designed for flat towing. You can use a diode kit such as # 154-792-118158.
You will also want to consult your vehicle owners manual on the proper procedure for towing the vehicle.
If you need base plates on your 2006 Accord use # 1545-1 if it is not a Hybrid. For a compatible tow bar and safety cables use # RM-522 and # RM-645.
Most states now require supplemental braking on the vehicle being flat towed and the easiest system to set up and use is the Even Brake proportional system # RM-9400. It applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
If your Accord is a Hybrid and has continuous power-assist brakes then you cannot use the Even Brake but you can use the Patriot # BLU37TR. I have included some helpful links on flat towing for you to view.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Hidden
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Vehicle Tow Bar Brake System
- Shop: Vehicle Tow Bar Wiring
- Shop: Base Plate for Tow Bar
- Shop: etrailer SD Non-Binding Tow Bar for Blue Ox and Curt Base Plates - RV Mount - 2" Hitch - 6K lbs
- Shop: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord
- Search Results: rm 88400
- Search Results: 6 diode kit
- Shop: Roadmaster Brake-Lite Relay Kit for Towed Vehicles
- Article: Tow Bar Wiring Overview
- Article: Can You Flat Tow a Toyota Tacoma?
- Q&A: Finding Cold Side Stop Light Switch In 2021 Jeep Cherokee To Install Demco Stay-IN-Play Duo DM86VR
- Q&A: Wire Gauge of Demco G-Force Controller
- Shop: Blue Ox Base Plate Kit - Fixed Arms
- Video: Installation Guide for the Demco Stay-IN-Play Duo Flat Tow Brake System - 2020 Chevrolet Traverse
- Shop: Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
- Q&A: How to Find COLD Side of Brake Light Switch for Hardwiring Brake Controller
- Q&A: Recommended Flat Towing Components For A 1997 Toyota 4Runner
- Video: Install: Roadmaster Universal Hy-Power Diode Wiring Kit on a 2021 Toyota Tacoma
- Q&A: Class I Trailer Hitch Installation on 2007 Honda Accord Sedan
- Article: How to Measure for Trailer Hitch Drop
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Transmission Cooler
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs
- Video: Roadmaster Diode 7 to 6 Wire Coil Kit Light Test
- Q&A: Wiring Diagram for the Adapter 6-Pole to 7-Pole Trailer Wiring Adapter # 47435
- Video: Choosing the Right Tow Bar Wiring
- Video: Roadmaster 6-Diode Universal Wiring Kit Installation - 2008 Honda Fit
- Q&A: Flat Towing a 1990 Suzuki Samurai With Separate Tail Light Wiring
on Custom Fit Vehicle Wiring
Sam
3/22/2013
Thanks for the reply and all the parts numbers I ordered the diode kits.